[Bjonnh.net]# _

Two new diprenylated coumaric acid isomers (1a and 1b) and two known congeners, capillartemisin A (2) and B (3), were isolated from Artemisia scoparia as bioactive markers using bioactivity-guided HPLC fractionation. Their structures were determined by spectroscopic means, including 1D and 2D NMR methods and LC-MS, with their purity assessed by 1D 1H pure shift qNMR spectroscopic analysis. The bioactivity of compounds was evaluated by enhanced accumulation of lipids, as measured using Oil Red O staining, and by increased expression of several adipocyte marker genes, including adiponectin in 3T3-L1 adipocytes relative to untreated negative controls. Compared to the plant’s 80% EtOH extract, these purified compounds showed significant but still weaker inhibition of TNFα-induced lipolysis in 3T3-L1 adipocytes. This suggests that additional bioactive substances are responsible for the multiple metabolically favorable effects on adipocytes observed with Artemisia scoparia extract.

Curcuma longa (turmeric) has an extensive history of ethnomedical use for common ailments, and “curcumin”-containing dietary supplements (CDS) are a highly visible portion of today’s self-medication market. Owing to raw material cost pressure, CDS products are affected by economically motivated, nefarious adulteration with synthetic curcumin (“syncumin”), possibly leading to unexpected toxicological issues due to “residual” impurities. Using a combination of targeted and untargeted (phyto)chemical analysis, this study investigated the botanical integrity of two commercial “turmeric” CDS with vitamin and other additives that were associated with reported clinical cases of hepatotoxicity. Analyzing multisolvent extracts of the CDS by 100% quantitative 1H NMR (qHNMR), alone and in combination with countercurrent separation (CCS), provided chemical fingerprints that allowed both the targeted identification and quantification of declared components and the untargeted recognition of adulteration. While confirming the presence of curcumin as a major constituent, the universal detection capability of NMR spectroscopy identification of significant residual impurities, including potentially toxic components. While the loss-free nature of CCS captured a wide polarity range of declared and unwanted chemical components, and also increased the dynamic range of the analysis, (q)HNMR determined their mass proportions and chemical constitutions. The results demonstrate that NMR spectroscopy can recognize undeclared constituents even if they represent only a fraction of the mass balance of a dietary supplement product. The chemical information associated with the missing 4.8% and 7.4% (m/m) in the two commercial samples, exhibiting an otherwise adequate curcumin content of 95.2% and 92.6%, respectively, pointed to a product integrity issue and adulteration with undeclared synthetic curcumin. Impurities from synthesis are most plausibly the cause of the observed adverse clinical effects. The study exemplifies how the simultaneously targeted and untargeted analytical principle of the 100% qHNMR method, performed with entry-level high-field instrumentation (400 MHz), can enhance the safety of dietary supplements by identifying adulterated, non-natural “natural” products.

This Perspective of the published essential medicinal chemistry of cannabidiol (CBD) provides evidence that the popularization of CBD-fortified or CBD-labeled health products and CBD-associated health claims lacks a rigorous scientific foundation. CBD’s reputation as a cure-all puts it in the same class as other “natural” panaceas, where valid ethnobotanicals are reduced to single, purportedly active ingredients. Such reductionist approaches oversimplify useful, chemically complex mixtures in an attempt to rationalize the commercial utility of natural compounds and exploit the “natural” label. Literature evidence associates CBD with certain semiubiquitous, broadly screened, primarily plant-based substances of undocumented purity that interfere with bioassays and have a low likelihood of becoming therapeutic agents. Widespread health challenges and pandemic crises such as SARS-CoV-2 create circumstances under which scientists must be particularly vigilant about healing claims that lack solid foundational data. Herein, we offer a critical review of the published medicinal chemistry properties of CBD, as well as precise definitions of CBD-containing substances and products, distilled to reveal the essential factors that impact its development as a therapeutic agent.

With contributions from the global natural product (NP) research community, and continuing the Raw Data Initiative, this review collects a comprehensive demonstration of the immense scientific value of disseminating raw nuclear magnetic resonance (NMR) data, independently of, and in parallel with, classical publishing outlets. A comprehensive compilation of historic to present-day cases as well as contemporary and future applications show that addressing the urgent need for a repository of publicly accessible raw NMR data has the potential to transform natural products (NPs) and associated fields of chemical and biomedical research. The call for advancing open sharing mechanisms for raw data is intended to enhance the transparency of experimental protocols, augment the reproducibility of reported outcomes, including biological studies, become a regular component of responsible research, and thereby enrich the integrity of NP research and related fields.

The notion of data transparency is gaining a strong awareness among the scientific community. The availability of raw data is actually regarded as a fundamental way to advance science by promoting both integrity and reproducibility of research outcomes. Particularly, in the field of natural product and chemical research, NMR spectroscopy is a fundamental tool for structural elucidation and quantification (qNMR). As such, the accessibility of original NMR data, i.e., Free Induction Decays (FIDs), fosters transparency in chemical research and optimizes both peer review and reproducibility of reports by offering the fundamental tools to perform efficient structural verification. Although original NMR data are known to contain a wealth of information, they are rarely accessible along with published data. This viewpoint discusses the relevance of the availability of original NMR data as part of good research practices not only to promote structural correctness, but also to enhance traceability and reproducibility of both chemical and biological results.

Composite-based, tooth colored dental restorations, in spite of their aesthetic appeal, are limited by a short life span. Every subsequent restoration results in the loss of healthy dental tissue. Thus, a bio-mimetic approach has been developed to enhance the mechanical strength of dentin using plant-derived proanthocyanidins (PACs). From a panel of eight active plants, grape seed extract showed the highest dentin biomodification potential, a 15-fold enhancement of dentin stiffness measured in MPa. Fractions with varying degrees of polymerization (DP) were obtained using solvent partitioning and centrifugal partition chromatography (CPC). Oligomeric PACs (OPACs, DP 2 – 7) surfaced as the most promising dentin biomodifiers compared to the constituent monomers and polymers (Dp ≥8). OPACs with DP 3 to 4 showed the most efficacious dentin-PAC interaction as evaluated by bio-mechanical tests. While one arm of the separation focused on the development of a highly active custom-made tri- and tetra-meric OPAC enriched mixture (GSE3+4), OPACs were also purified as single chemical entities. OPACs with predominantly 4β→8/6 B-type interflavan linkages (IFLs) along with one having a unique 2→8 IFL were isolated. Structural characterization employed 1D and 2D NMR at low temperature (255K) to overcome line-broadening due to atropisomerism. The presence of gallate ester moieties is a characteristic feature of grape seed PACs and the biological evaluation also highlighted the enhanced effect of galloylated OPACs on dentin biomodification. Grape seeds are thus, a viable source of novel restorative dental biomaterials and highlight a novel application of plant-based natural products in the biomedical field.

The revision of the structure of the sesquiterpene aquatolide from a bicyclo[2.2.0]hexane to a bicyclo[2.1.1]hexane structure using compelling NMR data, X-ray crystallography, and the recent confirmation via full synthesis exemplify that the achievement of “structural correctness” depends on the completeness of the experimental evidence. Archived FIDs and newly acquired aquatolide spectra demonstrate that archiving and rigorous interpretation of 1D 1H NMR data may enhance the reproducibility of (bio)chemical research and curb the growing trend of structural misassignments. Despite being the most accessible NMR experiment, 1D 1H spectra encode a wealth of information about bonds and molecular geometry that may be fully mined by 1H iterative full spin analysis (HiFSA). Fully characterized 1D 1H spectra are unideterminant for a given structure. The corresponding FIDs may be readily submitted with publications and collected in databases. Proton NMR spectra are indispensable for structural characterization even in conjunction with 2D data. Quantum interaction and linkage tables (QuILTs) are introduced for a more intuitive visualization of 1D J-coupling relationships, NOESY correlations, and heteronuclear experiments. Overall, this study represents a significant contribution to best practices in NMR-based structural analysis and dereplication.

High-throughput biology has contributed a wealth of data on chemicals, including natural products (NPs). Recently, attention was drawn to certain, predominantly synthetic, compounds that are responsible for disproportionate percentages of hits but are false actives. Spurious bioassay interference led to their designation as pan-assay interference compounds (PAINS). NPs lack comparable scrutiny, which this study aims to rectify. Systematic mining of 80+ years of the phytochemistry and biology literature, using the NAPRALERT database, revealed that only 39 compounds represent the NPs most reported by occurrence, activity, and distinct activity. Over 50% are not explained by phenomena known for synthetic libraries, and all had manifold ascribed bioactivities, designating them as invalid metabolic panaceas (IMPs). Cumulative distributions of ∼200,000 NPs uncovered that NP research follows power-law characteristics typical for behavioral phenomena. Projection into occurrence–bioactivity–effort space produces the hyperbolic black hole of NPs, where IMPs populate the high-effort base.

Plant derived proanthocyanidins are well-established compounds exhibiting high dentin biomodification potency. Among the effects, enhanced tissue biomechanics and biostability are of relevance to restorative dentistry. This study evaluated the adhesive properties of an enriched proanthocyanidin primer on the bond strength of experimental resin-based adhesives containing variable concentrations of HEMA.

The ability of certain oligomeric proanthocyanidins (OPACs) to enhance the biomechanical properties of dentin involves collagen cross-linking of the 1.3–4.5 nm wide space via protein–polyphenol interactions. A systematic interdisciplinary search for the bioactive principles of pine bark has yielded the trimeric PAC, ent-epicatechin-(4β→8)-epicatechin-(2β→O→7,4β→8)-catechin (3), representing the hitherto most potent single chemical entity capable of enhancing dentin stiffness. Building the case from two congeneric PAC dimers, a detailed structural analysis decoded the stereochemistry, spatial arrangement, and chemical properties of three dentin biomodifiers. Quantum-mechanics-driven 1H iterative full spin analysis (QM-HiFSA) of NMR spectra distinguished previously unrecognized details such as higher order J coupling and provided valuable information about 3D structure. Detection and quantification of H/D-exchange effects by QM-HiFSA identified C-8 and C-6 as (re)active sites, explain preferences in biosynthetic linkage, and suggest their involvement in dentin cross-linking activity. Mapping of these molecular properties underscored the significance of high δ precision in both 1H and 13C NMR spectroscopy. Occurring at low- to subppb levels, these newly characterized chemical shift differences in ppb are small but diagnostic measures of dynamic processes inherent to the OPAC pharmacophores and can help augment our understanding of nanometer-scale intermolecular interactions in biomodified dentin macromolecules.

1D NMR spectra contain a wealth of vital structural information that can enhance the description of bioactive molecules. The present study demonstrates how quantum-mechanics driven 1H iterative Full Spin Analysis (QM-HiFSA) is capable of distinguishing spectral detail that cannot be interpreted manually or visually, but provides important information of the 3D structure and bonding (re-)activity of the molecules. This approach is established by analyzing 1D NMR spectra of oligomeric proanthocyanidins (OPACs), which exhibit high dentin bioactivity, and were isolated from the inner bark of pine. The higher order coupling and proton-deuterium exchange effects observed in these complex molecules were fully explained and quantified by QM-HiFSA. Dimeric and trimer OPACs provide evidence that high δ precision is applicable to 13C, in addition to 1H 1D NMR spectra, requiring reporting to the ppb level and below. Both the nano chemical shifts (ppb) and the associated nano substituent chemical shifts (s.c.s.) are significant properties of the 1H and 13C NMR spectra and enable recognition of structural properties that are relevant to better understanding of the intermolecular interactions between the OPAC pharmacophores and dentin micromolecules triggering enhanced tissue mechanics.

The acquisition of 1D 1H NMR (HNMR) spectra is one of earliest steps in characterizing natural products and other organic molecules. For publication, HNMR information usually is “converted” into a table format, and sometimes spectral plots are provided. However, this transformation is lossy and frequently insufficient for unambiguous dereplication. This ambiguity can even lead to structural revision, such as in the recent case of aquatolide (1), a sesquiterpene lactone from Asteriscus aquaticus. Our study demonstrates that public dissemination of original (digital) HNMR data (FIDs) can be a powerful means of enhancing the reproducibility of structural assignments and, thus, any downstream biological studies. Using the archived 800 MHz HNMR spectrum, and employing a semi-automated quantum mechanics-driven spectral analysis (HiFSA), we were able to rule out the initial assignment (1a), confirm the revision (1b), and achieve the full interpretation of the HNMR fingerprints. Using additional examples of constitutional and diastereomeric isomers which exhibit complex and near-identical HNMR spectra, we show that the public sharing of original HNMR data (FIDs) is not only essential for robust structural assignments, but can enhance the reproducibility of research with bioactive natural products and other organic molecules simply and productively.

C-glycosylated flavones, including orientin, isoorientin, vitexin, and isovitexin, are minor but biologically significant constituents of fruit extracts of the chaste-tree (Vitex agnus-castus L.), a botanical supplement used to treat PMS and postmenopausal symptoms. The partition coefficient, or K-value, is the ratio of the concentration of a compound in each phase of a biphasic solvent mixture and is a physicochemical property of a particular compound in a particular solvent system. This value can be used to predict retention volume (V ret) in a countercurrent separation procedure. The K-values of C-glycosylflavones present in complex botanical fractions have been determined in a number of solvent system families (HEMWat, EBWat, HterAcWat, terAcWat) using the shake-flask technique combined with relative LC-MS quantification. This K-value database has been used to develop targeted centrifugal partition (CPC) and high-speed countercurrent chromatography (HSCCC) methods. In each separation procedure the actual K value and V ret was reasonably predicted by the shake-flask partition experiment, confirming the utility of this approach in choosing a solvent system and targeting the fraction that contains the desired compound. This K-value database allowed for the efficient isolation of C-glycosylflavones from V. agnus-castus using orthogonal CCC and CPC methods.

Proanthocyanidins (PACs) are secondary plant metabolites that mediate nonenzymatic collagen cross-linking and enhance the properties of collagen based tissue, such as dentin. The extent and nature of cross-linking is influenced by the composition and specific chemical structure of the bioactive compounds present in certain PAC-rich extracts. This study investigated the effect of the molecular weight and stereochemistry of polyphenol compounds on two important properties of dentin, biomechanics, and biostability. For that, purified phenols, a phenolic acid, and some of its derivatives were selected: PAC dimers (A1, A2, B1, and B2) and a trimer (C1), gallic acid (Ga), its esters methyl-gallate (MGa) and propyl-gallate (PGa), and a pentagalloyl ester of glucose (PGG). Synergism was assessed by combining the most active PAC and gallic acid derivative. Mechanical properties of dentin organic matrix were determined by the modulus of elasticity obtained in a flexural test. Biostability was evaluated by the resistance to collagenase degradation. PACs significantly enhanced dentin mechanical properties and decreased collagen digestion. Among the gallic acid derivatives, only PGG had a significant enhancing effect. The lack of observed C1:PGG synergy indicates that both compounds have similar mechanisms of interaction with the dentin matrix. These findings reveal that the molecular weight of polyphenols have a determinant effect on their interaction with type I collagen and modulates the mechanism of cross-linking at the molecular, intermolecular, and inter-microfibrillar levels.

The polyphenol source and molecular structure complexity affects interactions of proanthocyanidins (PACs) with dentin matrix. Therefore, this study evaluated the dentin bioactivity of compounds from a non-galloylated PACs-rich extract.

The present study demonstrates the importance of adequate precision when reporting the δ and J parameters of frequency domain 1H NMR (HNMR) data. Using a variety of structural classes (terpenoids, phenolics, alkaloids) from different taxa (plants, cyanobacteria), this study develops rationales that explain the importance of enhanced precision in NMR spectroscopic analysis and rationalizes the need for reporting Δδ and ΔJ values at the 0.1–1 ppb and 10 mHz level, respectively. Spectral simulations paired with iteration are shown to be essential tools for complete spectral interpretation, adequate precision, and unambiguous HNMR-driven dereplication and metabolomic analysis. The broader applicability of the recommendation relates to the physicochemical properties of hydrogen (1H) and its ubiquity in organic molecules, making HNMR spectra an integral component of structure elucidation and verification. Regardless of origin or molecular weight, the HNMR spectrum of a compound can be very complex and encode a wealth of structural information that is often obscured by limited spectral dispersion and the occurrence of higher order effects. This altogether limits spectral interpretation, confines decoding of the underlying spin parameters, and explains the major challenge associated with the translation of HNMR spectra into tabulated information. On the other hand, the reproducibility of the spectral data set of any (new) chemical entity is essential for its structure elucidation and subsequent dereplication. Handling and documenting HNMR data with adequate precision is critical for establishing unequivocal links between chemical structure, analytical data, metabolomes, and biological activity. Using the full potential of HNMR spectra will facilitate the general reproducibility for future studies of bioactive chemicals, especially of compounds obtained from the diversity of terrestrial and marine organisms.