As I fall down the NixOS rabbit hole, this is a reference page for me. This is base install of GNOME NixOS from my Acer laptop.

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
    ];

  # Bootloader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;

  boot.initrd.luks.devices."luks-ffdc02ba-11a8-4438-af51-e5a29595462b".device = "/dev/disk/by-uuid/ffdc02ba-11a8-4438-af51-e5a29595462b";
  networking.hostName = "nixos"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  # Enable networking
  networking.networkmanager.enable = true;

  # Set your time zone.
  time.timeZone = "Asia/Taipei";

  # Select internationalisation properties.
  i18n.defaultLocale = "en_US.UTF-8";

  i18n.extraLocaleSettings = {
    LC_ADDRESS = "en_CA.UTF-8";
    LC_IDENTIFICATION = "en_CA.UTF-8";
    LC_MEASUREMENT = "en_CA.UTF-8";
    LC_MONETARY = "en_CA.UTF-8";
    LC_NAME = "en_CA.UTF-8";
    LC_NUMERIC = "en_CA.UTF-8";
    LC_PAPER = "en_CA.UTF-8";
    LC_TELEPHONE = "en_CA.UTF-8";
    LC_TIME = "en_CA.UTF-8";
  };

  # Enable the X11 windowing system.
  services.xserver.enable = true;

  # Enable the GNOME Desktop Environment.
  services.xserver.displayManager.gdm.enable = true;
  services.xserver.desktopManager.gnome.enable = true;

  # Configure keymap in X11
  services.xserver = {
    layout = "us";
    xkbVariant = "";
  };

  # Enable CUPS to print documents.
  services.printing.enable = true;

  # Enable sound with pipewire.
  sound.enable = true;
  hardware.pulseaudio.enable = false;
  security.rtkit.enable = true;
  services.pipewire = {
    enable = true;
    alsa.enable = true;
    alsa.support32Bit = true;
    pulse.enable = true;
    # If you want to use JACK applications, uncomment this
    #jack.enable = true;

    # use the example session manager (no others are packaged yet so this is enabled by default,
    # no need to redefine it in your config for now)
    #media-session.enable = true;
  };

  # Enable touchpad support (enabled default in most desktopManager).
  # services.xserver.libinput.enable = true;

  # Define a user account. Don't forget to set a password with ‘passwd’.
  users.users.USER = {
    isNormalUser = true;
    description = "Elias Gasparis";
    extraGroups = [ "networkmanager" "wheel" ];
    packages = with pkgs; [
      firefox
    #  thunderbird
    ];
  };

  # Enable automatic login for the user.
  services.xserver.displayManager.autoLogin.enable = true;
  services.xserver.displayManager.autoLogin.user = "elias";

  # Workaround for GNOME autologin: https://github.com/NixOS/nixpkgs/issues/103746#issuecomment-945091229
  systemd.services."getty@tty1".enable = false;
  systemd.services."autovt@tty1".enable = false;

  # Allow unfree packages
  nixpkgs.config.allowUnfree = true;

  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [
  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
  #  wget
  ];

  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  # programs.mtr.enable = true;
  # programs.gnupg.agent = {
  #   enable = true;
  #   enableSSHSupport = true;
  # };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  # services.openssh.enable = true;

  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It‘s perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "23.11"; # Did you read the comment?

}

Here is the base configuration for the hardware. This is a LUKS encrypted LVM setup.

# Do not modify this file!  It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations.  Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:

{
  imports =
    [ (modulesPath + "/installer/scan/not-detected.nix")
    ];

  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "uas" "usb_storage" "sd_mod" ];
  boot.initrd.kernelModules = [ ];
  boot.kernelModules = [ "kvm-intel" ];
  boot.extraModulePackages = [ ];

  fileSystems."/" =
    { device = "/dev/disk/by-uuid/497a3b31-67d4-430b-966e-017ddfb1a71a";
      fsType = "ext4";
    };

  boot.initrd.luks.devices."luks-8904a9bb-a202-43fd-800a-40664735d3e9".device = "/dev/disk/by-uuid/8904a9bb-a202-43fd-800a-40664735d3e9";

  fileSystems."/boot" =
    { device = "/dev/disk/by-uuid/8701-931B";
      fsType = "vfat";
      options = [ "fmask=0022" "dmask=0022" ];
    };

  swapDevices =
    [ { device = "/dev/disk/by-uuid/00ade6e7-f638-4b18-8716-6c4404e9a7ed"; }
    ];

  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
  # (the default) this is the recommended approach. When using systemd-networkd it's
  # still possible to use this option, but it's recommended to use it in conjunction
  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
  networking.useDHCP = lib.mkDefault true;
  # networking.interfaces.wlp2s0.useDHCP = lib.mkDefault true;

  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
}