Everything about QuinLED LED Dimmers and Controllers
QuinLED Resistor Switcher During the 2022 revision updates of the QuinLED Dig-Uno, Dig-Quad and on the initial version of the Dig-Octa and Data-Booster a resistor switcher functionality was added to the boards. These resistor-switchers allow you to switch between a 249R and 33R output resistor, this helps adapt the data signal to the type of […] The post QuinLED Resistor Switcher appeared first on…
Can you run LEDs over POE? Back to article index TL;DR Yes, in a limited capacity it turns out you actually can! Video at the end of the article! Ever since I’ve starting talking about the custom QuinLED-ESP-ABE (Antenna Board + Ethernet) and especially running a QuinLED-Dig-Uno or QuinLED-Dig-Quad together with one of those making […] The post Can you run LEDs over POE? appeared first on…
What is the max amount of Addressable LEDs per controller? Back to article index I often see this question pass by in the Discord server and online, how many LEDs can controller X handle? And well, it’s true, cannot keep adding more LEDs to a digitally addressable LED strip/string and get the same results, after […] The post Max amount of Addressable LEDs? appeared first on quinled.info .
WLED 0.12 What do I configure for QuinLED WLED 0.13.1 is already available too, functionality and configuration stays the same! WLED 0.12.0 was released today and with it comes full multi-channel LED strip support and in GUI configurable pinout! This makes it so that most users will never have to do a custom compile again […] The post WLED 0.12 – What do I configure for QuinLED appeared first on…
Maximum length data wire LEDs (2022-12 update!) Back to article index This whole article talks about the data wire length from the controller to the first LED, going from LED and LED below does not apply! From LED to LED the signal is much less powerful then from a (QuinLED-Dig) controller. A different solution should […] The post Maximum length data wire LEDs (ws2812b, sk6812, ws2815) appeared…
xGeeks.ca store owner Ill 2021-02-14 Sadly I have to report that family of the store owner has reached out and Tollbringer, the store owner has fallen ill. I don’t know too much about the situation right now, but it does explain the lack of communication about orders. For now I will be removing the store […] The post xGeeks.ca Store Unavailable appeared first on quinled.info .
How to compile WLED yourself A lot of people have been asking how to compile WLED yourself, well, that’s exactly what we’re going to do in this livestream. I know it’s a bit long form content, but we go through it pretty quickly and within 30 minutes you should be building WLED from scratch. I […] The post Livestream: WLED Compile appeared first on quinled.info .
QuinLED-Dig-Quad with DC-DC converter (instead of dual linear converters) Back to index page Pre-Assembled v2 and v3 comes with custom integrated DC-DC circuit, DIY v3 also uses DC-DC converter from Dig-Uno Normal setup In the normal setup I’ve made for the QuinLED-Dig-Quad_v1 I used 2x Linear dropper (7809 and 7805) in cascade to drop the […] The post QuinLED-Dig-Quad with DC-DC converter…
Addressable LEDs + Christmas Tree = Great Match! Back to article index Pairing Addressable LEDs with a Christmas tree makes for an excellent looking match. This is the second year of using the very small “fairy light” type LEDs in our Christmas tree and although setting them up takes a while (we spent about 2 […] The post DIY Addressable Christmas Tree Guide appeared first on quinled.info .
ESP32 with External antenna for Dig-Uno and Dig-Quad Back to Addressable LEDs section This page has been scrapped, please see the newly available QuinLED-ESP32-AE (antenna external) version to equip your QuinLED-Dig-Uno or QuinLED-Dig-Quad with an External Antenna ESP32! The post ESP32 with External antenna for Dig-Uno and Dig-Quad appeared first on quinled.info .