Emma Top Finished the top yesterday and photographed today. Sewing: Tools and Cutlery Pouch I received my big sewing package yesterday and wanted to try out my new sewing tools. They really made a HUGE difference and it’s so much easier to measure and cut the fabric! The long, transparent ruler is definitely a must, combining with the A5 cutter mat. I like those small clips too - much…
From Kalajoki Socks to Slip Stitch Lines Socks After giving up on the ridiculous ultra-lace weight yarn on Kalajoki socks, I only have the Emma Top as my only WIP project left, but even that will be done soon and I already got a bit tired of it. So, I’m starting a new new pair of socks with the Slip Stitch Lines pattern.
Kalajoki Socks This is going soooooo slow that I can’t stand it any longer!!! The yarn is super thin, the stitch gauge is actually fine. Normally I would CO 60-64sts for socks and for this yarn I CO 76 sts which works well. However, the differences of row gauge is ENORMOUS. I measured my other fingering weight socks and they are appx. 13 rounds per inch, and for this one it’s at least…
Emma Top Finished the left front. Well…like I said, the pattern is extremely wordy. For left front I would write this instead: Knit row 1 as in pattern From row 2, increase stitches as row 1 every 6th row for another 6 times. Total 7 increase rows have been worked. After the last increase row (the 37th), work another 5 rows in pattern. Continue the pattern as it as. Knitting needles:…
Emma Top Almost finished the left front but I think the length is too crop to my liking. Decided to unravel it to the point of decrease and I’ll knit another 1" for both front and back. Knitting needles and cables Found a mysterious brand that produce very good quality cable that is compatible with Chiaogoo. Too bad that they sent the wrong size needle tips to me (2.5mm) which I barely uses.…
Project recap Ravelry: PurringYarn’s cancun boxy lace top - Beige Ver. Time spent: 27 hours Yarn: Loveyarn 回归线 丝语(02 Cookie 曲奇) Needle: US 4/3.5mm Duration: [2026-07-11 Sat] - [2026-07-24 Fri] Pattern: Cancun boxy lace top by e kate archer Yarn and pattern planning: some vent This yarn is 58% Cotton and 42% Linen. Not only it is rough to the touch, most important it’s incredibly stiff.…
Cancun Boxy Lace Top Finally finished knitting…!! I just have to wait for it to dry and then sew the two pieces together. I feel so relieved! The yarn is awful and hard to knit it with lace pattern. It’s so bad that I almost wanted to pause the project when I finished the first piece (and potentially never pick it up later). But somehow I got the courage of thinking less and just…
Cancun Boxy Lace Top Finally I found a lace top to knit with this stiffy yarn. Saw a girl wearing a similar style on the street that day and I was hooked! I have to say though, this yarn is probably the hardest I’ve ever worked with and makes me irritated! I’m holding it double which only makes it worse. Ughh! It feels like it’s time to call it a day after knitting.
Emma Top I knitted the swatch using the Loveyarn 丝语 (cotton/linen). The yarn was so stiff! I was speechless 😅. I felt that it was not suitable for this squishy pattern. Ordered a new dark green yarn from woolwarehouse to knit this pattern instead. Now I have to find something else to work with.
Sassy Classy Top Done! It’s blocked beautifully. I love the colour of my choice - it looks fabulous in this ribbing design. So chic! The cable details at the shoulders is a really nice touch too, simple yet elegant. If I had to pick anything, I wish the shoulder could be a bit wider, which would look more flattering given that I don’t have a straight shoulder line. Overall I’m…
Project recap Ravelry: PurringYarn’s Sassyclassycroptop - Celeste Blue Ver. Time spent: 41 hours Yarn: Loveyarn 回归线 絮语(天青) Needle: US 3/3.25mm Duration: [2026-06-26 Fri] - [2026-07-05 Sun] Pattern: Sassyclassycroptop by Ann-Kathrin Stoll The design I wanted to knit a summer rib top and was struggling between this and Mixed Rib Cami. Eventually I selected this one because the turtle neck…
Sassy Classy Top Well, I have to say this colour is lovely. My ribbing tension is ridiculously good after switching to Eastern knitting to work on the back section which requires me to work k2p1 rib on flat. Because this yarn doesn’t have much stretch, the ribbing can look very wonky. Could the neat ribbing a result of me knitting tighter? I don’t have the answer right now but at least…
Sample Knit #2 I tried three different ways of neater 1x1 ribbing: Hem: normal knit + Eastern purl Right sleeve: Eastern knit + normal purl Left sleeve: Eastern knit + Eastern purl So far, the last one looks the best, but I still want to see how they are shown once blocked. I don’t mind it at all - it didn’t take a tremendous amount but the result seems better. Of course, I think the…
Sample Knit #2 Finished the 1x1 ribbing of the body. This time I tried another way to achieve a neater 1x1 by working purls in Eastern way. It worked out beautifully! My observation is the wrong side of ribbing is noticeably neater in this way (compared to my normal ribbing, which has less difference), so I’m considering to also work the knit in the similar manner with the Eastern way. Maybe…
Sample Knit #1: Mini Scarf Just handed in my first sample knit! Even though I finished it in only 3 days, I actually felt a tiny bit of sad thinking it’ll be gone (my baby 🥺). But I guess that’s just part of feeling I need to handle with sample knitting. It’s really fun to explore yarns and patterns I wouldn’t normally knit with.
Project recap Ravelry: PurringYarn’s Mini Scarf ◈SAMPLE◈ Time spent: 13 hours Yarn: Cherished Fibres Cashmere Fingering (Sandalwood) Needle: US 4/3.5mm Duration: [2026-06-02 Tue] - [2026-06-05 Fri] Pattern: City Walk Scarf Mini by Sixian (Angela) Wu My first experience in sample knitting This is my very first sample knit! After working on this project, my verdict is that sample knit does…
Sassy Classy Top, and Thoughts about Pattern Design Finished the turtle neck part. I’m not a big fan of the pattern writing to be honest. Some part reads very confusing. For example: the Round 1 and 2 mark in the Shoulder section is not clearly marked in standard round number. although I understand how it works, technically it is incorrect to start a new row with “M1R-P” before…
Project recap Ravelry: PurringYarn’s Walk in the park socks Time spent: 30 hours Yarn: MC: The Knitting Loft Boots CC1: Lang Yarns Jawoll Superwash 75/25 (69 Blau Meliert) CC2: Loveyarn 回归线 知足 (Green 圣诞绿) Needle: US 1/2.25mm Duration: [2026-03-26 Thu] - [2026-05-10 Sun] Pattern inspiration: Walk in the park socks pattern by Nicole santos Yarn and pattern planning Blue remain: 28g Green…
Project recap Ravelry: PurringYarn’s Camisole No. 7 - Lavender Mist Ver. Time spent: 34 hours Yarn: Loveyarn 回归线 锦纯(Lavender Mist 烟紫) Needle: US 3/3.25mm Gauge: 27.5 sts = 4" Duration: [2026-04-29 Wed] - [2026-05-09 Sat] Pattern: Camisole No. 7 pattern by My Favourite Things Yarn planning The yarn is a mix of 74% Silk and 25% Cotton. It looks very different from KFO Pure Silk which is a…
Camisole No.7 My yarn finally arrived from the sea and I can start swatching. This pattern is mostly broken 1x1 rib so I figure I got to practice my way of doing 1x1 ribbing. Tried different ways of knitting styles: From CO to black st marker: regular flicking (tuck the yarn after purl) Black marker to white: normal continental style White marker to gold: combination style Gold marker to pink:…
Project recap Ravelry: PurringYarn’s Tracery Time spent: 72.5 hours Yarn: MC: Loveyarn 回归线 悸动 (墨黑 black) CC: Ancient Arts Fibre Crafts Revival (A Summer in Monaco - Monet) Needle: US 2/2.75mm (main), US 1/2.25mm (ribbing) Gauge: 30 sts = 4" Duration: [2027-04-03 Sat] - [2026-04-19 Sun] Pattern: Tracery by Kathleen Sperling Size: 30 3/4" Yarn: the star I bought the yarn in Knit City Toronto…
Tracery vest Finished the front panel and the front left. I did some research and decided to use my measurement from Twist Loop Top and a steady ratio to make the end stitch matches the pattern. Here is my modifications of neck shaping for crew neck. I’m at row 70 before starting the neckline shaping, with a total of 87 sts. The arm hole depth length is 11cm at this point. Starting row 71,…
Project recap Ravelry: PurringYarn’s April Cardigan - Pistachio Ver. Time spent: 80 hours Yarn: ColourMart 2/18NM heavy lace wt merino kent (444364 Pistacchio) Needle: US 6/4.0mm (body), US 5 (ribbing), US 2 for the button band Gauge: 21 sts = 4" Duration: [2026-03-08 Sun] - [2026-04-11 Sat] Pattern: April Cardigan by PetiteKnit Errata Errata : in the sleeve increase section, the description…
Tracery vest My colourwork was awful for the first ten rows because I wasn’t paying lots of attention to it. At some point I finally realized the problem and started testing alternative ways of tensioning colourwork. I’m using two handed fair isle method and it has been comfortable and quick for me. I tried holding two strands on right hand but couldn’t stand the slow speed so…
April Cardigan I’ve finished everything except the button, still waiting it to be delivered. Ehh! Spring project planning Spring is finally here. I already planned projects for summer knits, but I have too many options for this spring, especially after the Knit City event.
Project recap Ravelry: PurringYarn’s Helix Basic socks - Seventies Stripes Ver. Time spent: 18 hours Yarn: MC: Patons North America Kroy Socks(55734 Seventies stripes) CC: Loveyarn 回归线 知足(茶白 White) Needle: US 1/2.25mm (main), US0/2.0mm (ribbing) Duration: [2026-03-12 Thu] - [2026-03-22 Sun] Modifications I used helical knitting technique for the stripe but used my own toe-up sock recipe…
April Cardigan The double knitted button band is taking forever and I’m not even half way through it. It looks better than the 1x1 rib though, I’ll admit. I placed another order with Colourmart as my calculations was off (forgot to count for the other sleeves 😅) so I definitely don’t need to play yarn chicken.
April Cardigan Finished the increase finally and just separated sleeves and body. Yesterday I noticed one of the increase line looks weird due to two missing increase sts and I have to unravel appx. 10 rows since it’s cannot be fixed by going down the ladder. After that I was more careful with the increase count, but still, I got 2 additional sts (42sts) for sleeves panel after sleeves inc…
Project recap Ravelry: PurringYarn’s Time Traveler Socks Time spent: 25 hours Yarn: Zwerger Garn Opal Hundertwasser 4-fach / 4-ply (2100 Nachbarn) Needle: US 0/2.0mm Duration: [2026-02-27 Fri] - [2026-03-08 Sun] Pattern: Time Traveler Socks by Liz Sedmak Yarn, pattern and modifications I bought this skein of Opal sock yarn in Munich. I was planning to knit the sock pattern on the back of the…
Time Traveller Socks I’ve been practicing flicking purl with this project. Tried multiple ways of improving the speed and accuracy of purl stitch, including: Change the angle slightly of holding yarn by adjust my finger position: the inspiration came from the youtube how I knit: flicking demonstration in knit, purl, and 1x1 rib . However, it feels unnatural to me. Change the left needle…
Project recap Ravelry: PurringYarn’s Non-felted Slippers - Latte Ver. Time spent: 4 hours Yarn: Loveyarn 回归线 知安(03 Latte 拿铁) Needle: US 9/5.5mm Duration: [2026-03-02 Mon] Pattern: Non-felted Slippers by Yuko Nakamura Yarn planning This yarn was a gift with purchase when I placed the order from Loveyarn 回归线. It contains 30% wool and 70% acrylic. I usually don’t work with Super Bulky…
Time Traveller Socks CO this socks two days ago using Judy’s magic cast on. Once I finished the toe in magic loop, I switched to 9" circular. It felt fiddly first but I finally learned (again) to knit it comfortably. The stitch speed still feels slower than the way I knit with magic loop or DPN, but the overall speed is faster because I no longer need to switch needles or cables. I believe…
Twinkle sweater Reworking on this one. I’ve been wearing this sweater for a few months since November and felt feel it’s a tad short. Finally decided to unravel the bind off (undoing the Italian sewn bind off tooke forever!) and to the point where it begins decrease for colourwork.
Anjou Vest It expanded quite a bit after blocking. I also reknitted the armhole using US 7 needles instead of US 8. After blocking the size is almost the same as the pattern size 2: 92cm bust. It looks super cute and OMG I absolutely love the buttons I chose. Somehow it matches the anjou pattern perfectly, with the same blue tone in the anjou plus the contrasting colour of yellow, which adds a…
Heart and Chain Sweater OMG it looks gorgeous on me after blocking!! The size is perfect - I pulled it horizontally a bit on purpose because I’m worried it’s not oversized enough, but it turned out to be a very relaxed fit. I don’t think I need to pull it so hard next time. Love love love it, looks so cute 🥰🥰🥰
Project recap Ravelry: PurringYarn’s Heart Chain Sweater - Ivory Dress Ver. Time spent: 111 hours Yarn: Solid: Loveyarn 回归线 溯原(米红) Mohair: Loveyarn 回归线 慕顏(米杏) Needle: US 7/4.5mm, US 5/3.75mm (rib) Gauge: 18 sts = 4'' Duration: [2026-01-09 Fri] - [2026-02-15 Sun] Pattern: Heart Chain Sweater by From Mayo Size I’m knitting size S with US 7 in order to achieve the gauge and desired…
Anjou I casted on yesterday and almost finished the back yoke, but I decided to frog and start over because it looks too busy. The red-orange GENMOU yarn is still too thin compared to the Noro yarn, which has really inconsistent thickness. Sigh. About the solution - I went to my LYS and found a matching mohair with almost the exact same colour (I’m happy with the current tone and don’t…
Heart and Chain Sweater Finished the right sleeve and got 15g left for the 2nd skein, meaning one sleeve costs 85g merino yarn. That leaves me 130g merino for the remaining body. I think I have enough to finish it off! I knitted few rows of body before picking up the 2nd sleeve. The length is okay-ish but I’m still not sure about it. Another half diamond would make it more suitable to dress…
Heart and Chain Sweater It’s endless…!! I used up one skein for left sleeve already (on row 64, 2 and half diamonds). Looking at the length, it would take another 2 diamonds plus ribbing. I’m really not sure if I have enough yarn now! The sweater is getting soooo heavy and it’s started hard to manage everything, and the remaining skein of the body also drove me crazy a…
Heart and Chain Sweater Knitted a little more than four and half diamonds in the front. I think the length might be enough but unsure. Also I don’t know if I have enough yarn. Assuming two sleeves together would take the same amount of the body, then the sleeves chart would take appx. 4 skeins total, that leaves me 2 skeins remaining.
Heart and Chain Sweater I finished the folded collar yesterday. It looks quite neat and the neck depth is awesome. I love it! Measuring the yarn for the remaining to see if I have enough: starting a new skein of 50g, I’m in the middle of row 161, heart repeat row 11 and diamond row 27.
Heart and Chain Sweater Ok so I’m almost finished three and half diamonds in the front, while I just used up the 2nd skein of mohair. It’s getting a bit tedious for me now and I’m thinking I should probably switch to the collar and sleeves first, in case I don’t have enough yarn.
Heart and Chain Sweater Measurement Pre-mid-blocking: Front length: 11" Back length: 12.5" Bust: 18" Length of a diamond: 4.25" After mid-blocking: Front length: 10.75" Back length: 13" Bust: 19" Length of a diamond: 4" I have completed two and half diamonds. This is almost the same as the pattern picture but still looks quite short. After measuring, I found that although my stitch gauge is…
Project recap Ravelry: PurringYarn’s Melt the ICE Hat Time spent: 11 hours Yarn: MacAusland’s Woollen Mills 2-ply fine (Fawn) Needle: US 8/5.0mm, US 6/4.0mm Duration: [2026-01-26 Mon] - [2026-01-28 Wed] 2d Pattern: Melt the ICE Hat by YarnCultMN Knitting for a cause This is a good cause to knit and show some support given the recent events happened in Minnesota. The pattern is designed…
Melt the ICE Hat I found some scrape of the same yarn so turned out I have just enough to make a short braid tassel. It could be longer but I’m happy with what I have! I don’t even have a single strand of yarn left so this project is really testing my skills of winning the yarn chicken!!
Melt the ICE Hat I started this hat yesterday. This is a good cause to knit and show some support given the recent events happened in Minnesota. The pattern is easy but I ran out of yarn. I’m using stash from MacAusland Mills and I noticed I won’t be able to finish it when I was in half way of the decrease, even though I already did some mods like decrease 6 sts per round, I just…