Stacking Headers for Feather - 12-pin and 16-pin female headers

Product ID: 2830

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well We used to have these in 0.6 x 0.4mm 'rectangular' pins, now...

Lithium Ion Polymer Battery Ideal For Feathers - 3.7V 400mAh

Product ID: 3898

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a genuine 2-pin 25mm...

Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM

Product ID: 5323

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. That's right - it's the new Adafruit ESP32-S3 Feather! With native USB and 8 MB flash, this board will let you upgrade your...

Adafruit ESP32-S3 Feather 8MB with w.FL Antenna

Product ID: 5885

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, native USB, and with this version easy external antenna support thanks to an on-board w.FL connector. This Feather is great for powering your IoT projects. That's right - it's the new Adafruit...

Adafruit Feather nRF52840 Express

Product ID: 4062

The Adafruit Feather nRF52840 Express is the new Feather family member with Bluetooth® Low Energy and native USB support featuring the nRF52840! It's our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built-in USB plus battery charging. With native USB it's even ready to join the CircuitPython party. We have other boards in the...

Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT

Product ID: 5400

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM module on there, it makes quick work of WiFi and Bluetooth® projects that take advantage of Espressifs most popular chipset. Recently we had to redesign this feather to move from the obsolete CP2104 to the available CH9102F and one thing led to another and before you...

Short Headers Kit for Feather - 12-pin + 16-pin Female Headers

Product ID: 2940

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather project takes up, but still maintain that flexible configuration. "Normal" socket headers have an...

Assembled Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the board take flight, no soldering required! These displays are small, only about...

Adafruit Feather STM32F405 Express

Product ID: 4382

ST takes flight in this Feather board. The new STM32F405 Feather (video) that we designed runs CircuitPython at a blistering 168MHz – our fastest CircuitPython board ever! We put a STEMMA QT / Qwiic port on the end, so you can really easily plug and play I2C sensors. This Feather has lots of goodies: STM32F405 Cortex M4 with FPU and 1MB Flash, 168MHz speed....

Adafruit Feather RP2040 with USB Type A Host

Product ID: 5723

You're probably really used to microcontroller boards with USB, but what about a dev board with two? Two is more than one, so that makes it twice as good! And the Adafruit Feather RP2040 with USB Host is definitely double-the-fun of our other Feather RP2040 boards, with a USB Type A port on the end for connecting USB devices to. Now you might be thinking "hey...

Adafruit ESP32-S3 Reverse TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Product ID: 5691

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what we've done with this new development board. It's basically our ESP32-S3 TFT Feather but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons...

Adafruit Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver

Product ID: 5650

If there is one thing Adafruit is known for, its mega-blinky-fun-rainbow-LEDs. We just love sticking NeoPixels anywhere and everywhere. When we saw the new 'PIO' peripheral on the RP2040 from Raspberry Pi, we just knew it would be perfect for driving large quantities of NeoPixels. So we created this board, the Adafruit Feather RP2040 SCORPIO, designed specifically...

Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic

Product ID: 4650

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are...

Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT / Qwiic

Product ID: 5980

This is the Adafruit Feather RP2040 Adalogger - our take on an 'all-in-one' RP2040 data-logger (or data-reader) with built-in USB, battery charging, and a microSD holder ready to rock! We have other boards in the Feather family, check'em out here The RP2040 Adalogger is the same size and shape as a Feather and is intended to make your next data logging or data...

Adafruit HUZZAH32 – ESP32 Feather Board

Product ID: 3405

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings. We...

Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT

Product ID: 5724

If you'd like quickly get started with CAN bus interfacing, with no soldering required, our Adafruit RP2040 CAN Bus Feather comes ready-to-rock with a microcontroller, CAN chipset, and terminal blocks for instant gratification. The controller used is the MCP25625 (aka an MCP2515 with built-in transceiver), an extremely popular and well-supported chipset that has...

Adafruit ESP32 Feather V2 with Headers - 8MB Flash + 2 MB PSRAM - STEMMA QT

Product ID: 5900

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather. With the fabulous ESP32 WROOM module on there, it makes quick work of WiFi and Bluetooth® projects that take advantage of Espressifs' most popular chipset. Recently, we had to redesign this feather to move from the obsolete CP2104 to the available CH9102F. One thing led to another, and before we...

Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4

Product ID: 3857

It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and...

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz - RadioFruit

Product ID: 3178

This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth® LE and without...

Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)

Product ID: 3591

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use...

Adafruit Feather M4 CAN Express with ATSAME51

Product ID: 4759

One of our favorite Feathers, the Feather M4 Express, gets a glow-up here with an upgrade to the SAME51 chipset which has built-in CAN bus support! Like its SAMD51 cousin, the ATSAME51J19 comes with a 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this...

Adafruit Feather RP2040

Product ID: 4884

A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather Treatment" and so we did! This Feather features the RP2040, and all niceties you know and love about Feather Measures 2.0" x 0.9" x 0.28" (50.8mm x 22.8mm x 7mm) without headers soldered in. Light...

Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards

Product ID: 2922

A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Time Clock and micro SD card storage to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! Check out...

Adafruit Feather M0 Adalogger

Product ID: 2796

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Adalogger - our take on an 'all-in-one' Cortex M0 datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather M0 with...

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

Product ID: 2772

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather M0 Basic Proto, it has a bunch of prototyping space built right in. We have other boards in the Feather family, check'em out here! At the Feather M0's heart is...

Adafruit Feather nRF52 Bluefruit LE - nRF52832

Product ID: 3406

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth® Low Energy board, with a native-Bluetooth® chip, the nRF52832! It's our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB and battery charging. We have other boards in the Feather family, check'em out here. This chip has twice the flash,...

Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier

Product ID: 5768

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create advanced projects quickly. One popular combo is our Feather M4 or Feather RP2040 with a Prop-Maker FeatherWing on top to create animatronics or props that boot up instantly and can drive...

Adafruit ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM - STEMMA QT

Product ID: 5438

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM module on there, it makes quick work of WiFi and Bluetooth® projects that take advantage of Espressifs most popular chipset. Recently we had to redesign this feather to move from the obsolete CP2104 to the CP2102N and one thing led to another and before you know it we...

Adafruit Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit

Product ID: 3176

This is the Adafruit Feather M0 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and...

FeatherWing Proto - Prototyping Add-on For All Feather Boards

Product ID: 2884

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing Proto - a prototyping add-on for all Feather boards. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! This has a duplicate breakout for each pin on a Feather,...

FeatherS3[D] ESP32-S3 by Unexpected Maker

Product ID: 6399

Introducing the FeatherS3[D] - The pro ESP32-S3 Development Board in the Feather Format! FeatherS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! Two antenna options - one board! The onboard antenna is selected by default, so you...

Adafruit Prop-Maker FeatherWing

Product ID: 3988

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. We looked at hundreds of prop builds, and thought...

Adafruit Feather M0 RFM96 LoRa Radio - 433MHz - RadioFruit

Product ID: 3179

This is the Adafruit Feather M0 RFM96 LoRa Radio (433 MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 433MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth® LE and without...

Adafruit Feather RP2350 with HSTX Port and 8MB PSRAM

Product ID: 6130

RP2350 flies high with the Feather format - now you can use any FeatherWings with this battery-powered dev board. It comes with 8MB of flash, 22pin HSTX output port, Stemma QT, debug SWD, and optional PSRAM spot. It's our first RP2350 board and we crammed a ton of goodies into our classic Feather format. It's an excellent starter board to go along with your Pico 2....

Adafruit Feather RP2040 with RFM95 LoRa Radio - 915MHz - RadioFruit and STEMMA QT

Product ID: 5714

This is the Adafruit Feather RP2040 RF95 LoRa Radio. We call these RadioFruits, our take on a microcontroller with a "Long Range (LoRa)" packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth® LE and without the...

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Product ID: 2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the...

Adafruit ESP32-S2 Feather - 4 MB Flash + 2 MB PSRAM - STEMMA QT / Qwiic

Product ID: 5000

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? That's right - it's the new Adafruit ESP32-S2 Feather! With native USB and 4 MB flash + 2 MB of PSRAM,...

Adafruit ESP32-S2 Reverse TFT Feather

Product ID: 5345

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what we've done with this new development board. It's basically our ESP32-S2 TFT Feather but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons...

Adafruit Feather 32u4 RFM95 LoRa Radio- 868 or 915 MHz - RadioFruit

Product ID: 3078

This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 868/915 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are...

Assembled Terminal Block Breakout FeatherWing for all Feathers

Product ID: 2926

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each side. There's...

FeatherWing Doubler - Prototyping Add-on For All Feather Boards

Product ID: 2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards simultaneously side-by-side! In addition to the board the Doubler comes with: 1 Doubler...

Assembled Adafruit FeatherWing OLED - 128x64 OLED Add-on - STEMMA QT / Qwiic

Product ID: 6313

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect the FeatherWing on top of your Feather board and let the board take flight, no soldering required! These displays are small,...

Adafruit Power Relay FeatherWing

Product ID: 3191

A Feather board without ambition is a Feather board without FeatherWings! This is the Power Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Compared to our smaller Relay FeatherWings, this...

Adafruit Latching Mini Relay FeatherWing

Product ID: 2923

A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Using our Feather Stacking Headers or...

8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards

Product ID: 2928

A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo​ FeatherWing, you can add 8 x 12-bit PWM outputs to your Feather board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! You want to make a cool...

Adafruit Feather 32u4 Bluefruit LE

Product ID: 2829

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB and battery charging. Its an Adafruit...

Adafruit Ultimate GPS FeatherWing - PA1616D

Product ID: 3133

Give your Feather a sense of place, with an Ultimate GPS FeatherWing. In 2013 we designed the Ultimate GPS module to satisfy all your GPS desires - and now we have brought its power and versatility plus more to our Feather series with the Adafruit Ultimate GPS FeatherWing! This FeatherWing plugs right into your Feather board and gives it a precise, sensitive, and...

Adafruit Feather RP2350 with HSTX Port

Product ID: 6000

RP2350 flies high with the Feather format - now you can use any FeatherWings with this battery-powered dev board. It comes with 8MB of flash, 22pin HSTX output port, Stemma QT, debug SWD, and optional PSRAM spot. It's our first RP2350 board and we crammed a ton of goodies into our classic Feather format. It's an excellent starter board to go along with your Pico 2....

DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards

Product ID: 3028

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. This RTC is the most precise you can get in a small, low power package. Using our Feather Stacking...

Adafruit TFT FeatherWing - 3.5" 480x320 Touchscreen for Feathers - V2 with TSC2007

Product ID: 3651

Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED backlight. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as much as our 2.4" TFT...

Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Displays - STEMMA QT

Product ID: 5727

Easy e-paper and RP2040 finally come to your Feather with this Adafruit RP2040 Feather Think Ink that's designed to make it a breeze to add almost any common e-Ink/e-Paper display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even...

FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers

Product ID: 3417

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other Feather Wings without needing any stacking headers! The Tripler comes with: 1 Tripler Wing PCB. 3 sets Feather Female Headers. The...

Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing - SSD1680 - Mono / 4 Grayscale

Product ID: 4777

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also...

Adafruit ESP32-S3 Reverse TFT with w.FL Antenna

Product ID: 6303

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what we've done with this new development board. It's basically our ESP32-S3 TFT Feather but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons...

Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz

Product ID: 3458

With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. We have other boards...

Adafruit Feather HUZZAH with ESP8266 - Loose Headers

Product ID: 2821

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It's an ESP8266 WiFi module with...

Terminal Block kit for Feather - 0.1" Pitch

Product ID: 3173

We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right size to it your Feather board or FeatherWing. They are great news since nothing makes a project harder to maintain than a lot of loose wiring. Perfect when you don't need a full Terminal Block FeatherWing These terminal...

Adafruit Feather M0 Bluefruit LE

Product ID: 2995

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built-in USB and battery charging. It's an Adafruit...

Adafruit USB Host FeatherWing with MAX3421E

Product ID: 5858

Lots of microcontrollers these days have USB ports on them, to program or debug, act like a keyboard or disk drive, or simply send data between a computer and your firmware. But did you know that you can also add a USB Host port? That means that your microcontroller project can have a keyboard or mouse or disk drive plugged into it - which opens up a huge ecosystem...

Adafruit Non-Latching Mini Relay FeatherWing

Product ID: 2895

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Using our Feather Stacking Headers or...

TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers - V2

Product ID: 3315

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and...

Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM

Product ID: 5303

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices and a built in ambient sensor? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project sensor project flyyyyy? That's right - it's the new Adafruit ESP32-S2 Feather with...

Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz - RadioFruit

Product ID: 3231

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth® Feathers, will let you bridge from 433/900...

Adafruit CAN Bus FeatherWing - MCP2515

Product ID: 5709

CAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is now used for many robotics or sensor networks that need better range and addressing than I2C, and don't have the pins or computational ability to talk on Ethernet. CAN is 2 wire differential, which means it's good for long distances and noisy environments. Messages are...

Adafruit RGB Matrix Featherwing Kit - For RP2040, M0 and M4 Feathers

Product ID: 3036

Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with any of our M0 or M4 based Feathers. Please note: This wing is only tested/designed to work with the RP2040,...

Adafruit Feather 32u4 Adalogger

Product ID: 2795

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather 32u4 with a...

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White

Product ID: 3149

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright white LEDs. This is...

Adafruit Feather M0 Express - ATSAMD21 Cortex M0

Product ID: 3403

At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0+ processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need...

Adafruit Feather RP2040 with DVI Output Port - Works with HDMI

Product ID: 5710

Wouldn't it be cool if you could display images and graphics from a microcontroller directly to an HDMI monitor or television? We think so! So we designed this RP2040 Feather that has a digital video output (a.k.a DVI) that will work with any HDMI monitor or display. Note it doesn't do audio, just graphics! It's kinda like we took our RP2040 Feather and DVI Breakout...

Adafruit Feather RP2040 RFM69 Packet Radio - 868 or 915MHz - RadioFruit and STEMMA QT

Product ID: 5712

This is the Adafruit Feather RP2040 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a RFM69HCW 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth® LE and...

Adafruit Radio FeatherWing - RFM69HCW 900MHz - RadioFruit

Product ID: 3229

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth® Feathers, will let you bridge from 433/900...

Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player

Product ID: 3357

Bend all audio files to your will with the Adafruit Music Maker FeatherWing! It's a fun-size version of our Music Maker shield for Arduino! This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of stuff with the...

Adafruit 8x16 LED Matrix FeatherWing w/o Matrices

Product ID: 3090

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. At 0.8" square, the little 8x8 matrices have everything a big LED matrix has, but bite sized! A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 8x16 LED Matrix FeatherWing! This FeatherWing backpack makes...

Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player - Stereo 3W Amplifier

Product ID: 3436

Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It's a fun-size version of our Music Maker shield for Arduino, and similar to our other Music Maker FeatherWing, but this one is even better - with an on-board 3 Watt amplifier! This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide...

Adafruit LSM6DSOX + LIS3MDL FeatherWing - Precision 9-DoF IMU - STEMMA QT / Qwiic

Product ID: 4565

Upgrade any Feather board with precision motion sensing with the ST 9-DoF IMU, an all-in-one sensing 'Wing. It sports two fantastic sensors from ST to provide 9 degrees of full-motion data. The board includes an LSM6DSOX, a 6-DoF IMU accelerometer + gyro. The 3-axis accelerometer can tell you which direction is down towards the Earth (by measuring gravity) or how...

Adafruit 2.13" HD Tri-Color eInk / ePaper Display FeatherWing - 250x122 RW Panel with SSD1680

Product ID: 4814

Easy e-paper comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also...

Adafruit Feather 32u4 Basic Proto

Product ID: 2771

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in We have other boards in the Feather family, check'em out here! At the Feather 32u4's heart...

Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz - RadioFruit

Product ID: 3177

This is the Adafruit Feather M0 RFM69 Packet Radio (433 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69 HCW packet radio transceiver plus built in USB and battery charging. It's an Adafruit Feather M0 with a 433MHz radio module cooked in! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets...

Adafruit Floppy FeatherWing with 34-Pin IDC Connector

Product ID: 5679

Relive the days when storage was counted out in kilo-bytes not giga-bytes, using the Adafruit Floppy FeatherWing on a Feather board - perfect for interfacing with 34-Pin IDC Connector floppy drives that were ubiquitous on PC's. This 'Wing has level shifting and a ready-to-plug connector that works with 3.5" or 5.25" floppy disks for reading or writing! Floppy disks...

Adafruit ISM330DHCX + LIS3MDL FeatherWing - High Precision 9-DoF IMU

Product ID: 4569

Upgrade any Feather board with precision motion sensing with the ST 9-DoF IMU, an all-in-one sensing 'Wing. It sports two fantastic sensors from ST to provide 9 degrees of full-motion data. The ST ISM330DHCX is an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit). This IMU sensor has 6 degrees of freedom - 3 degrees each of linear...

Adafruit Radio FeatherWing - RFM69HCW 433MHz - RadioFruit

Product ID: 3230

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular, or Bluetooth® Feathers, will let you bridge from 433/900...

Adafruit INA219 FeatherWing

Product ID: 3650

The INA219 FeatherWing makes power-monitoring problems a thing of the past. Instead of struggling with two multimeters, you can just use the handy INA219 chip on this breakout to measure both the high side voltage and DC current draw over I2C with 1% precision. Works with any and all Feathers! Communicates over I2C so its super-simple to use, you can even change the...

Adafruit Feather 32u4 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit

Product ID: 3076

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 900MHz. We call these RadioFruits, our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 900 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than...

Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500

Product ID: 3061

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. It's an...

Adafruit Grove and Stemma QT FeatherWing for all Feathers

Product ID: 5862

The Adafruit Grove and Stemma QT FeatherWing for all Feathers allows folks to use many Grove devices with Feather boards! It fits nicely on top and has 3x Analog/Digital connectors, 1x UART connector and 2x I2C connectors. Not a ton, but enough to get many small projects going! We even managed to fit a vertical Stemma QT port on the end for another I2C connection....

Adafruit LoRa Radio FeatherWing - RFM95W 433 MHz - RadioFruit

Product ID: 3232

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth® Feathers, will let you bridge from 433/900...

Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz - RadioFruit

Product ID: 3079

This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more...

Adafruit 14-Segment Alphanumeric LED FeatherWing - STEMMA QT / Qwiic

Product ID: 3089

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 0.54" 4-Digit 14-Segment Display FeatherWing! This 14-segment FeatherWing backpack makes it really easy to add a bright alphanumeric display...

Adafruit Quad 2x2 FeatherWing Kit with Headers

Product ID: 4253

This is the FeatherWing Quad 2x2 - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers. The boards are all set up in a 2x2 grid, thus the name The Quad comes with: 1 Quad...

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Red

Product ID: 3130

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Red Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, White, Yellow-Green, Blue, and Yellow. This is a nice, bright alphanumeric display that shows letters and...

Adafruit ESP32-S2 Feather with w.FL Antenna - STEMMA QT / Qwiic

Product ID: 6282

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? That's right - it's the new Adafruit ESP32-S2 Feather with with w.FL antenna connector! With native USB...

Adafruit HalloWing M0 Express

Product ID: 3900

This is Hallowing..this is Hallowing... Hallowing! Hallowing! Are you the kind of person who doesn't like taking down the skeletons and spiders until after January? Well, we've got the development board for you. This is electronics at its most spooky! The Adafruit HalloWing is a skull-shaped ATSAMD21 board with a ton of extras built in to make for an adorable...

Adafruit Joy FeatherWing for all Feathers

Product ID: 3632

Make a game or robotic controller with this Joy-ful FeatherWing. This FeatherWing has a 2-axis joystick and 5 momentary buttons (4 large and 1 small) so you can turn your feather board into a tiny game controller. This wing communicates with your host microcontroller over I2C so it's easy to use and doesn't take up any of your precious analog or digital pins. There...

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red

Product ID: 3134

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

Adafruit ESP32-S2 Reverse TFT Feather with wFL - STEMMA QT / Qwiic

Product ID: 6312

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what we've done with this new development board. It's basically our ESP32-S2 TFT Feather but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons...

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Green

Product ID: 3129

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Green Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Blue, Red, White, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers...

Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - STEMMA QT

Product ID: 3088

One segment? No way dude! 7-Segments for life! A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing! This 7-segment FeatherWing backpack makes it really easy to add a 4-digit numeric display with decimal points and even 'second colon dots' for making a clock. This version does...

Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!

Product ID: 4537

Since we first started carrying NeoPixels back in 2012, the chainable RGB LEDs have taken over the world. And a big part of that success is due to the simplicity of their wiring - just one data wire, no matter how many pixels you've got. So no surprise they're everywhere, blinking away in art exhibits, maker faire demos, DJ booths, decorations, and costumes. But, at...

Adafruit RGB Matrix FeatherWing Kit - For nRF52840 Feathers

Product ID: 4702

Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing for nRF52840. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with our nRF52840 based Feathers. Please note: This 'Wing is only tested/designed to work with the...

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Blue

Product ID: 3106

One segment? No way dude! 7-Segments for life! This is the Blue Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing - White

Product ID: 3109

One segment? No way dude! 7-Segments for life! This is the White Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Yellow - STEMMA QT / Qwiic

Product ID: 3110

One segment? No way dude! 7-Segments for life! This is the Yellow Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, White, and Blue! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - White

Product ID: 3127

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the White Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and...

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Yellow

Product ID: 3131

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Yellow Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Yellow-Green, Blue, and White. This is a nice, bright alphanumeric display that shows letters and...

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Yellow

Product ID: 3135

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

Adafruit ADXL343 + ADT7410 Sensor FeatherWing

Product ID: 4147

Upgrade any Feather board with motion and precision temperature sensing, with this all-in-one sensing FeatherWing. It sports two fantastic sensors from Analog Devices: an ADXL343 triple-axis accelerometer and an ADT7410 precision temperature sensor. Both sensors are connected over the shared I2C bus, so you can use it with any and all Feathers! We also break out the...

Adafruit Feather 32u4 Bluefruit LE with Stacking Headers - Assembled

Product ID: 3242

This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB and battery charging. It's an Adafruit Feather 32u4 with a BTLE module, ready to rock! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new...

Teensy 3.x Feather Adapter

Product ID: 3200

Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly charging! This Feather adapter rearranges the pins of a Teensy 3.x to give you the same shape and pinout for our Feathers. We've tested our FeatherWings so far and all are drop-in compatible. It's a...

Adafruit Feather nRF52 Pro with myNewt Bootloader - nRF52832

Product ID: 3574

The Adafruit Feather nRF52 Pro is another Bluetooth® Low Energy board for advanced projects and users who want to use a fully open-source Bluetooth® Low Energy 5.0 stack. It has a native Bluetooth chip, the nRF52832, as well as built-in USB Serial and battery charging! We have other boards in the Feather family, check'em out here. This is a special Feather -...

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Red

Product ID: 3152

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright red LEDs. This is...

Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!

Product ID: 3249

Since we first started carrying NeoPixels back in 2012, the chainable RGB LEDs have taken over the world. And a big part of that success is due to the simplicity of their wiring - just one data wire, no matter how many pixels you've got. So no surprise they're everywhere, blinking away in art exhibits, maker faire demos, DJ booths, decorations and costumes. But, at...

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Blue

Product ID: 3128

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Blue Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Green, Red, White, Yellow-Green and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers in...

Adafruit AMG8833 IR Thermal Camera FeatherWing

Product ID: 3622

A Feather board without ambition is a Feather board without FeatherWings! This is the Thermal Camera FeatherWing: thanks to the Panasonic AMG8833 8x8 GridEYE sensor, it adds heat-vision to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! This...

Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT / Qwiic

Product ID: 5477

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. That's right - it's the new Adafruit ESP32-S3 Feather with dual core and native USB - this version comes with 4 MB flash, and 2...

Assembled Adafruit Feather M0 WiFi with Stacking Headers

Product ID: 3044

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers

Product ID: 3619

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with...

Header Kit for Feather - 12-pin and 16-pin Female Header Set

Product ID: 2886

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get soldered on either side of the Feather board. Now you can plug in FeatherWings to add more capability to your portable project. Unlike our Feather Stacking Headers, they aren't designed to 'stack', but they're more compact....

Adafruit MIDI FeatherWing Kit

Product ID: 4740

Turn your Feather into a song-bird with this musically-enabled FeatherWing that adds MIDI input and output jacks to just about any Feather. You get both input and output DIN-5 MIDI jacks, a 3V optically isolator so you can interface with MIDI on 3.3V logic/power microcontrollers, and two blinky indicator LEDs underneath the jacks to help you know when data is sent...

Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Product ID: 5483

We've got a new machine here at Adafruit, it can uncover your deepest desires. Don't believe me? I'll turn it on right now to prove it to you! What, you want your very own soft serve ice cream machine? OK well, that's not something we can provide. But we can provide your second-deepest desire: an ESP32-S3 Feather board with a built in IPS TFT color display. It's got...

Adafruit Feather nRF52840 Sense

Product ID: 4516

The Adafruit Feather Bluefruit Sense takes our popular Feather nRF52840 Express and adds a smorgasbord of sensors to make a great wireless sensor platform. This Feather microcontroller comes with Bluetooth® Low Energy and native USB support featuring the nRF52840! This Feather is an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB...

Adafruit Feather 32u4 with RFM69HCW Packet Radio - 433MHz - RadioFruit

Product ID: 3077

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 433MHz. We call these RadioFruits, our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than...

Adafruit PyBadge for MakeCode Arcade, CircuitPython, or Arduino

Product ID: 4200

What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! We wanted to see how much we could cram into a ​3 3⁄8 × ​2 1⁄8 inch rounded rectangle, to make an all-in-one dev board with a lot of possibilities, and this is what we came up with. The PyBadge is a compact board, like...

Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

Product ID: 3010

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

JST 2-pin Extension Cable with On/Off Switch - JST PH2

Product ID: 3064

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with our JST-terminated battery packs or LiIon & LiPoly batteries/accessories/chargers!...

Adafruit ESP32-C6 Feather - STEMMA QT

Product ID: 5933

The ESP32-C6 is Espressif’s first Wi-Fi 6 SoC integrating 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE) and the 802.15.4 protocol. It brings the goodness you know from the low-cost C3 series and improves it with Zigbee/802.15.4 at 2.4Ghz. That means it could make for great Matter development hardware! We took our Feather ESP32-S2 and swapped out the 'S2 for a C6. Plus some...

Adafruit Ethernet FeatherWing

Product ID: 3201

Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet. Just plug in a standard ethernet cable, and run the Ethernet2 library for cross-platform networking. Works with all/any of our Feather boards as...

Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Product ID: 5300

We've got a new machine here at Adafruit, it can uncover your deepest desires. Don't believe me? I'll turn it on right now to prove it to you! What, you want unlimited mozzarella sticks? OK well, that's not something we can provide. But we can provide your second-deepest desire: an ESP32-S2 Feather board with a built in IPS TFT color display. It's got all the...

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are small, only...

Adafruit CRICKIT FeatherWing for any Feather

Product ID: 3343

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...

36-pin Stacking header - pack of 5!

Product ID: 3366

Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-away header, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of five! Stacking headers are a twist on the standard/common male and female header sets. In this...

Assembled DC Motor + Stepper FeatherWing Add-on

Product ID: 3243

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of...

Assembled Feather HUZZAH w/ ESP8266 WiFi With Stacking Headers

Product ID: 3213

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It's an ESP8266 WiFi module with...

Adafruit Feather 32u4 Bluefruit LE with Headers - Assembled

Product ID: 3379

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit with Headers - our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB and battery charging. Its an...

Assembled Adafruit Prop-Maker FeatherWing

Product ID: 4145

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. This version of the FeatherWing has plain headers...

NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards

Product ID: 2945

A Feather board without ambition is a Feather board without FeatherWings! This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave. Put on your sunglasses...

Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version

Product ID: 3939

What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! We wanted to see how much we could cram into a ​3 3⁄8 × ​2 1⁄8 inch rounded rectangle, to make an all-in-one dev board with a lot of possibilities, and this is what we came up with. The...

Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor

Product ID: 4264

Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Feather (like the Feather M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32....

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Red

Product ID: 3108

One segment? No way dude! 7-Segments for life! This is the Red Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Blue, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board - Unexpected Maker

Product ID: 5629

Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive storage buffers. The FeatherS2 Neo has onboard LiPo battery charging,...

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Blue

Product ID: 3137

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

Product ID: 3153

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright yellow LEDs. This is...

TensorFlow Lite for Microcontrollers Kit

Product ID: 4317

Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine learning waters. Kit includes: Adafruit PyBadge with SAMD51 Cortex M4F...

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings

Product ID: 2965

You wont be able to look away from the mesmerizing patterns created by these Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings. These 15x7 LED displays can be paired with with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. They even come with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in...

In stock

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Various

Product ID: 3139

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We have these combo packs in Green, White, Red, Blue, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers in a...

In stock

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display

Product ID: 3140

One segment? No way dude! 7-Segments for life! This is the Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We have these combo packs in Green, Blue, Red, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219...

In stock

Adafruit 0.8" 8x16 Matrix FeatherWing Display Kit Various Colors

Product ID: 3155

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright LEDs. These are the...

In stock

Adafruit Mini Color TFT with Joystick FeatherWing

Product ID: 3321

Add a dazzling color display to your Feather project with this Adafruit Mini Color TFT with Joystick FeatherWing. It has so much stuff going on, we could not fit any more parts on the PCB! There's a 0.96" 160x80 Color TFT Display with 16-bit full color capability. And, so you can make a proper UI we added a 5-way navigation switch and two push buttons. The joystick...

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather - With or Without Headers

Product ID: 4091

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are small, only...

In stock

Adafruit 2.13" Monochrome eInk / ePaper Display FeatherWing - 250x122 Monochrome with SSD1680

Product ID: 4195

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The...

Adafruit Quad Side-By-Side FeatherWing Kit with Headers

Product ID: 4254

This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers! The Quad comes with: 1 Quad Side-by-side Wing PCB. 4 sets Feather Female...

Adafruit Prop-Maker FeatherWing - Without or Without Headers

Product ID: 4265

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. We have these with and without headers already...

In stock

Grove Shield FeatherWing for Particle Mesh and all Feathers

Product ID: 4309

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feather line! Working with Grove requires no soldering. Just plug the sensors,...

Adafruit 2.9" Tri-Color eInk / ePaper Display FeatherWing - SSD1680 - Red Black White

Product ID: 4778

Easy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also...

Adafruit TFT FeatherWing - 3.5" 480x320 Capacitive Touchscreen - STEMMA QT / Qwiic

Product ID: 5872

Bedeck your Feather project with a beautiful Adafruit TFT FeatherWing, 3.5" 480x320 Capacitive Touchscreen. This TFT display is 3.5" diagonal with a bright white-LED backlight and a built-in microSD card socket. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as...

Adafruit Feather HUZZAH with ESP8266 WiFi - with or without headers

Product ID: 3404

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an ESP8266 WiFi module with all...

In stock

Adafruit Feather 32u4 Bluefruit LE - with or without headers

Product ID: 3503

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth® Low Energy with built in USB and battery charging. Its an Adafruit...

In stock

Adafruit HUZZAH32 – ESP32 Feather Board - with or without Headers

Product ID: 3707

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings. We...

In stock

Adafruit Feather M0 WiFi - with or without Headers

Product ID: 4083

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

In stock

Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino

Product ID: 4242

What fits in your pocket, is fully Open Source, and can run CircuitPython, MakeCode Arcade or Arduino games you write yourself? That's right, it's the Adafruit PyGamer! We wanted to make an entry-level gaming handheld for DIY gaming, and maybe a little retro-emulation. It's not the fastest and best of everything but it is an all-in-one dev board with a lot of...

Adafruit HalloWing M4 Express - Goth Adafruit Black Edition

Product ID: 4300

This is Hallowing..this is Hallowing... Hallowing! Hallowing! Following up on 2018's most-successful-skull-shaped development board, we UPPED our -skull-shaped development board game, and re-spinned (re-spun?) the HalloWing M0 into the HalloWing M4 with MORE of everything that makes this the spoooookiest dev board. Are you the kind of person who doesn't like taking...

Assembled Adafruit Feather HUZZAH with ESP8266 With Headers

Product ID: 3046

Feather is the flagship development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging and...

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green

Product ID: 3136

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

SMT Socket Header Kit for FeatherWings

Product ID: 4743

These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers, but for reflow-friendly builds these headers are recommended! We use these on all types of 'Wings, from...

Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

Product ID: 2598

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its...

Paper Signals Bundle

Product ID: 3022

Paper Signals is an open source project that lets you make little voice-controlled objects that track simple things, like the weather. You can build any of the example Paper Signals Google has on g.co/papersignals. Or, grab the code on GitHub and create something of your own. To make one, you’ll need the parts in this bundle, along with a few other items you...

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Green

Product ID: 3151

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright green LEDs. This is...

SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)

Product ID: 4515

The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Feather to four SparkFun Qwiic / Stemma QT connectors. The plug-n-play ecosystem allows for easy daisy chaining so,...

No longer stocked

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Cool White

Product ID: 3138

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

No longer stocked

Particle Argon Kit - nRF52840 - Bluetooth® Low Energy and WiFi

Product ID: 3993

Discontinued - you can grab the Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT instead! Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Bluetooth Low Energy and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a...

No longer stocked

Particle Boron LTE Kit - nRF52840 with LTE Cellular Modem

Product ID: 3994

Discontinued - you can grab the Nordic Thingy: 91 nRF91 Cellular Development Board - NRF6943 instead! Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a double-dose of Bluetooth Low Energy and LTE Cellular - so you're covered for network connectivity, no matter where you are. The Boron LTE is a powerful LTE CAT-M1/NB1...

No longer stocked

Particle Xenon Kit - nRF52840 - Bluetooth® Low Energy & Mesh

Product ID: 3995

Discontinued - you can grab Particle Argon Kit - nRF52840 with Bluetooth® Low Energy and WiFi instead! Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little CircuitPython or Arduino-compatible boards, and but they will no longer be supported by the Particle Cloud service....

No longer stocked

Particle Mesh WiFi Bundle - Full Starter Kit

Product ID: 4004

Discontinued - you can grab Particle Argon Kit - nRF52840 with BLE and WiFi instead! Warning: Particle is deprecating a Xenon / Mesh support. With a little effort these boards can be converted/reprogrammed and make for great little CircuitPython or Arduino-compatible boards, and but they will no longer be supported by the Particle Cloud service. Woohoo, it's time for...

No longer stocked

AdaBox001 - Welcome to the Feather Ecosystem

Product ID: 3193

Please note! This is NOT the subscription version of AdaBox! This is ONLY AdaBox001 that shipped out to AdaBox subscribers in September of 2016. This version does not include free shipping, the lithium ion battery, or AdaBox subscriber exclusive pin. If you'd like to subscribe to AdaBox, please visit the AdaBox page! When we launched our subscription service for...

No longer stocked

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Green

Product ID: 3107

Discontinued - you can grab this Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Red instead! One segment? No way dude! 7-Segments for life! This is the Green Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Blue, Red, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the...

No longer stocked

Adafruit 0.54" Quad Alphanumeric FeatherWing - Yellow/Green

Product ID: 3132

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Yellow/Green Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Green, Red, Blue, and White. This is a nice, bright alphanumeric display that shows letters and numbers in a...

No longer stocked

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Product ID: 3150

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright blue LEDs. This is...

No longer stocked

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green

Product ID: 3154

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright yellow-green LEDs....

No longer stocked

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White

Product ID: 3163

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in many vivid...

No longer stocked

Adafruit DotStar FeatherWing - 6 x 12 RGB LEDs

Product ID: 3449

A Feather board without ambition is a Feather board without FeatherWings! This is the DotStar FeatherWing, a 6x12 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave. Put on your sunglasses...

No longer stocked

Assembled Music Maker FeatherWing w/ Stereo 3W Amplifier - MP3 OGG WAV MIDI Synth Player

Product ID: 3470

Discontinued - you can grab Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player - Stereo 3W Amplifier instead! Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It's a fun-size version of our Music Maker shield for Arduino, and similar to our other Music Maker FeatherWing, but this one is even better - with an...

No longer stocked

Particle Ethernet FeatherWing

Product ID: 4003

This three-in-one Particle Ethernet Feather is a mix of our Ethernet 'wing and the Tripler 'wing. The form-factor is based around the Adafruit FeatherWing Tripler. The two side connectors allow you to plug in one Particle Mesh device along with a Feather accessory. The Ethernet FeatherWing is deisgned to be the fastest way to add wired connectivity to your Argon,...

No longer stocked

Adafruit 2.13" Tri-Color eInk / ePaper Display FeatherWing - 212 x 104 pixels - Z16 Panel wit

Product ID: 4128

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image...

No longer stocked

Grove Shield FeatherWing - Wio Lite

Product ID: 4357

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for many Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feather line! Working with Grove requires no soldering. Just plug the...

No longer stocked

Binho Feather / Stemma QT Interface Board

Product ID: 4461

This board makes it easy for you to interface your Binho Nova host adapter with any Feather form-factor device. I2C, SPI, and UART interfaces are all wired up. By default, the 3V3 and 5V rails are connected so that the Binho Nova can power the sensors, but this can be easily disabled by cutting the exposed traces. Additionally, this interface board features a STEMMA...

No longer stocked

Pimoroni Enviro + FeatherWing - PIM502

Product ID: 4674

Discontinued - you can grab the Adafruit ADXL343 + ADT7410 Sensor FeatherWing instead! Care about air with Enviro+ FeatherWing. It's packed full of environmental sensors that'll get you started in the world of citizen science. Monitor weather, light level, noise pollution, and air quality, in your local area and contribute your data to better understand trends in air...

No longer stocked

LCD FeatherWing from Oddly Specific Objects

Product ID: 5581

The LCD FeatherWing from Oddly Specific Objects is a low-power, CircuitPython-compatible, I²C-driven display that works with Adafruit’s Feather line of development boards. It uses the BU9796 segment LCD controller to drive a custom liquid crystal display glass with 48 segments, including: Five indicator icons: Bell, Wifi, Moon, Arrows, and Battery. Five...

No longer stocked

Adafruit Feather 32u4 FONA

Product ID: 3027

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 FONA - our take on an 'all-in-one' Arduino-compatible + audio/sms/data capable cellular with built in USB and battery charging. Its an Adafruit...

No longer stocked

Adafruit WICED WiFi Feather - STM32F205 with Cypress WICED WiFi

Product ID: 3056

Discontinued - you can grab Adafruit HUZZAH32 – ESP32 Feather Board instead! Say "Hi!" to the WICED Feather! Perfect for your next Internet connected project, with a powerful processor and WiFi core that can take anything you throw at it - this Feather is WIC(K)ED AWESOME! Feather is the new development board from Adafruit, and like its namesake it is thin,...

No longer stocked

Particle Argon - nRF52840 with Mesh and WiFi

Product ID: 3997

Woohoo, it's time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Mesh networking and and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic...

No longer stocked

Particle Boron LTE - nRF52840 with Mesh and LTE Cellular Modem

Product ID: 3998

As of January 17, 2023 - the Boron LTE is now powered by EtherSIM, Particle's new globally available, self-optimizing SIM with no data plans or device fees. Particle's Free Plan supports up to 100 devices, cellular data, and fully-featured platform access with no time limit. Woohoo, it's time for a Particle Mesh party! And the Particle Boron LTE is bringing it with a...

No longer stocked

Icarus IoT Board V2 - nRF9160

Product ID: 4753

The Icarus is a cost-effective cellular IoT board built around Nordic Semi's nRF9160 modem and combines LTE-M, NB-IoT, GPS, accelerometer, USB, LiPo charger, as well as an eSIM with free data out of the box and a nano SIM connector. Control, monitor, and keep track of any asset, fleet or cargo, quickly and easily with this pre-certified device! You might be looking...

No longer stocked

FeatherS2 - ESP32-S2 Feather Development Board

Product ID: 4769

Introducing the FeatherS2 - The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker. The FeatherS2 is a power house, fully souped up with 16 MB of Flash memory (for firmware and file storage) and 8 MB of QSPI-based external PSRAM so you can have massive storage buffers. This Feather comes with two 3.3V regulators: The first one is...

No longer stocked

Pink Adafruit Feather RP2040 - Freebie

Product ID: 5299

Winter of 2021, we included a free Pink Adafruit Feather RP2040 for orders $99 or more. Now available here! Vibrant-colored PCBs are of interest in the maker community. For years, fab houses such as OSH Park have offered rich purple PCBs, along with Cytron, offering several RP2040 boards with its own take on purple PCBs. We've spun up the popular (and award-winning...

FeatherS3 - ESP32-S3 Development Board by Unexpected Maker

Product ID: 5399

Introducing the FeatherS3 - The pro ESP32-S3 Development Board in the Feather Format The FeatherS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your FeatherS3 with the latest CircuitPython firmware, whenever you desire. Just plug your FeatherS3 into your computer and it will...

No longer stocked

Feather Click Shield by MikroElektronika

Product ID: 4496

MikroElektronika's Feather Click Shield will expand your Feather projects to "fly" with more than 750 Click boards available from MikroE. This coterie of Click boards gives you a versatile selection of peripheral devices that can be taken off the shelf and used for prototyping in no time. The shield is designed with two proprietary mikroBUS sockets, allowing all the...

No longer stocked

Keyboard FeatherWing - QWERTY Keyboard + 2.6" LCD

Product ID: 4818

From the folks at Solder Party comes the Keyboard FeatherWing, an easy way to add a handheld QWERTY keyboard and a 2.6” color display (+ more) to your project! Nice hand-held size and great for typing with your thumbs, early 2000s-style. The keyboard itself does not contain an MCU/CPU/SoC that you can program; you will need a board compatible with the Adafruit...

No longer stocked