104 lines (92 with data), 4.8 kB
# this config file was generated with the help of
# xmode2-0.7.0 on 2004-11-11
#
# contributed by Adrien Beau <adrien.put_my_name_here@free.fr>
#
# brand: Philips
# model no. of remote control: RC07102/01
# device being controlled by this remote: AS680C sound system, many others
#
# This remote is sold as part of many Philips sound systems. There
# are some variations depending on which features the sound system
# offers. For example, this particular remote supports selecting
# one of the three available CD slots, when another remote offers
# some TV controls instead. Anyway, all codes sent by the keys are
# the appropriate standard Philips codes, so you can use your
# remote to have basic control over many Philips devices.
#
# The timings and protocol information were obtained from
# http://www.ustr.net/infrared/index.shtml
# This helped me ensure that the information below is accurate and
# can be used as a basis for other Philips/RC5 remotes. I tuned
# the "gap" a little bit so I would get better key repeats.
begin remote
name Philips-RC07102/01
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 864 864
zero 864 864
plead 864
gap 125000
toggle_bit 2
frequency 37037
# Descriptive Key Name Code Real Function
begin codes
# These are the "System Select" keys. They change which
# mode the AS680C system and the remote are in. Most keys
# on the remote emit a different code for each of the four
# possible modes.
KEY_TUNER 0x000000000000147F # Was: Tuner
Tape_1/2 0x00000000000014BF # also Switch Decks
KEY_CD 0x000000000000153F # Was: CD
KEY_AUX 0x000000000000157F # Was: Aux
# These keys always send the same code. These are
# Amplifier (Amp) codes.
DBB 0x0000000000000406 # Dynamic Bass Boost
DSC 0x000000000000040F # Digital Sound Control
Inc_Surr 0x0000000000000400 # Incredible Surround
KEY_VOLUMEDOWN 0x0000000000001411 # Was: Volume_Down
KEY_VOLUMEUP 0x0000000000001410 # Was: Volume_Up
# These are the codes sent by the keys in Tuner mode. The
# Select_CD_1, Select_CD_2, Select_CD_3, Repeat, Shuffle,
# Pause, Play, and Stop keys send no codes in Tuner mode.
Tuner_Power 0x000000000000144C # Standby
Tuner_Program 0x000000000000047A # Create Preset
Tuner_Fast_Backward 0x000000000000145F # Search Previous
Tuner_Fast_Forward 0x000000000000145E # Search Next
Tuner_Previous_Track 0x0000000000001461 # Previous Preset
Tuner_Next_Track 0x0000000000001460 # Next Preset
# These are the codes sent by the keys in Tape mode.
# The Select_CD_1, Select_CD_2, Select_CD_3, Repeat,
# Shuffle, and Program keys send no codes in Tape mode.
Tape_Power 0x000000000000148C # Standby
Tape_Rewind 0x00000000000014B2
Tape_Pause 0x00000000000014B0
Tape_Fast_Forward 0x00000000000014B4
Tape_Previous_Track 0x00000000000014A1 # Find Previous Track
Tape_Next_Track 0x00000000000014A0 # Find Next Track
Tape_Play 0x00000000000014B5
Tape_Stop 0x00000000000014B6
# These are the codes sent by the keys in CD mode.
CD_Power 0x000000000000150C # Standby
CD_Select_CD_1 0x0000000000001537 # (CD_Record)
CD_Select_CD_2 0x0000000000001538 # (CD_External1)
CD_Select_CD_3 0x0000000000001539 # (CD_External2)
CD_Repeat 0x000000000000151D # Continuous Repeat
CD_Shuffle 0x000000000000151C
CD_Program 0x0000000000001524
CD_Fast_Backward 0x0000000000001532
CD_Pause 0x0000000000001530
CD_Fast_Forward 0x0000000000001534
CD_Previous_Track 0x0000000000001521
CD_Next_Track 0x0000000000001520
CD_Play 0x0000000000001535
CD_Stop 0x0000000000001536
# This is the code sent by the only key in Aux & Phono
# mode. The other keys (except the Amp keys, listed above)
# do not send any code.
Aux_Power 0x000000000000154C # Standby
end codes
end remote
