82 lines (75 with data), 2.8 kB

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.1-git(default) on Thu Feb  5 17:37:03 2015
#
# contributed by Chickenmarkus
#
# brand:                                   Onkyo
# model no. of remote control:             RC-866M
# devices being controlled by this remote: predefined "Onkyo Blue-ray Disc Player" on button "BD/DVD" of AV-Receiver Onkyo TX-NR626's universal remote control RC-866M
#
# Kernel revision: 3.13.0-45-generic
# Driver/device option: --driver=default --device=/dev/lirc0
# Capture device:  TSOP4838 on GPIO9 of Raspberry Pi Model B
# Kernel modules: dev_rpi gpio_in_pin=9
# Type of device controlled: BlueRay-Player
# Devices controlled: "Onkyo Blue-ray Disc Player"
#
#
# Note: predefined remote control mode on button "BD/DVD" to control OpenELEC on RaspberryPi
#       picture: http://www.onkyo.waw.pl/images/626_4.jpg
#
#
begin remote
  name  lircd.conf
  bits            8
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100
  header       8998  4416
  one           646  1594
  zero          646   467
  ptrail        644
  repeat       9004  2195
  pre_data_bits   24
  pre_data       0x4BF800
  gap          107363
  toggle_bit_mask 0x0
      begin codes
          KEY_OK                   0x10    # "ENTER", KEY_ENTER
          KEY_UP                   0x0A
          KEY_DOWN                 0x8A
          KEY_LEFT                 0x4A
          KEY_RIGHT                0xCA
          KEY_EXIT                 0x90    # "RETURN", KEY_ESC
          KEY_PLAY                 0xD8
          KEY_PAUSE                0xF8
          KEY_STOP                 0x38
          KEY_FORWARD              0x30
          KEY_BACK                 0xB0
          KEY_NEXTSONG             0xB8
          KEY_PREVIOUSSONG         0x78
          KEY_0                    0xE8
          KEY_1                    0x70
          KEY_2                    0xF0
          KEY_3                    0x08
          KEY_4                    0x88
          KEY_5                    0x48
          KEY_6                    0xC8
          KEY_7                    0x28
          KEY_8                    0xA8
          KEY_9                    0x68
          KEY_102ND                0x18    # "+10"
          KEY_CLEAR                0xD2    # "CLR"
          KEY_A                    0x63    # KEY_RED
          KEY_B                    0xE3    # KEY_GREEN
          KEY_C                    0x13    # KEY_YELLOW
          KEY_D                    0x93    # KEY_BLUE
          KEY_HOME                 0x79
          KEY_CONFIG               0x72    # "TOP MENU"
          KEY_SETUP                0xB2    # "SETUP"
          KEY_POWER                0x20    # "SOURCE-Power"
      end codes
end remote