[291b40]: / remotes / nse / URC20-C8.lircd.conf Maximize Restore History
80 lines (71 with data), 3.5 kB
#
# this config file was automatically generated
# using lirc-0.8.0pre2(serial) on Thu Jan 19 12:14:32 2006
#
# contributed by Sean Phillips (silvercliff|hotmail.com)
#
# brand: NSE
# model no. of remote control: URC20-C8
# devices being controlled by this remote: Using 'TV2' and code 191. This
# is only because it doesnt clash with any of my other IR devices (TV, VCR,
# Another PC...).
#
begin remote
name NSE_URC20-C8
bits 24
flags SPACE_ENC
eps 30
aeps 100
header 3576 1707
one 500 1270
zero 500 376
ptrail 500
pre_data_bits 24
pre_data 0x400401
gap 70222
toggle_bit 0
begin codes
KEY_POWER 0x00BCBD # Was: POWER
KEY_1 0x000809 # Was: 1
KEY_2 0x008889 # Was: 2
KEY_3 0x004849 # Was: 3
KEY_4 0x00C8C9 # Was: 4
KEY_5 0x002829 # Was: 5
KEY_6 0x00A8A9 # Was: 6
KEY_7 0x006869 # Was: 7
KEY_8 0x00E8E9 # Was: 8
KEY_9 0x001819 # Was: 9
1/11 0x00DCDD # Was: 1-/11
2/12 0x004A4B # Was: 2-/12
KEY_0 0x009899 # Was: 10/0
CH\*P/C 0x00F0F1 # Was: CH\*P/C
TV/VCR 0x00A0A1
MENU/MEMO 0x008C8D
EXIT/NORMAL 0x003031
CONTRAST+ 0x001011
CONTRAST- 0x009091
BRIGHTNESS+ 0x006061
BRIGHTNESS- 0x00E0E1
SATURATION+ 0x005051
SATURATION- 0x005C5D
KEY_CHANNELUP 0x002C2D # Was: CH+
KEY_CHANNELDOWN 0x00ACAD # Was: CH-
KEY_UP 0x80D051 # Was: UP
KEY_DOWN 0x801091 # Was: DOWN
KEY_LEFT 0x8050D1 # Was: LEFT
KEY_RIGHT 0x80B839 # Was: RIGHT
KEY_ENTER 0x8030B1 # Was: ENTER
KEY_E 0x000E0F # Was: E
KEY_F 0x008E8F # Was: F
KEY_G 0x004E4F # Was: G
KEY_H 0x00CECF # Was: H
KEY_RECORD 0x8038B9 # Was: RECORD
^ 0x8020A1
KEY_3> 0x80A021 # Was: 3>
KEY_MUTE 0x004C4D # Was: MUTE
KEY_VOLUMEUP 0x000405 # Was: VOL+
KEY_VOLUMEDOWN 0x008485 # Was: VOL-
KEY_PAUSE 0x80C041 # Was: PAUSE
KEY_STOP 0x809011 # Was: STOP
end codes
end remote