71 lines (65 with data), 1.9 kB

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.0-pre1(default) on Sun Sep  7 00:53:46 2014
#
# contributed by Steven Shamlian
#
# brand: Kenmore
# model no. of remote control: Unknown
# devices being controlled by this remote: Kenmore 253.79081
#
# Kernel revision: 3.12.26+
# Driver/device option: --driver default --device /dev/lirc0
# Capture device:  Vishay TSOP6238 to Raspberry Pi GPIO pin 23
# Kernel modules: lirc_rpi
# Type of device controlled: Air Conditioner
# Devices controlled: Kenmore 253.79081
#
# Remote Layout:
#
# /------------------------\
# |KEY_POWER       KEY_TIME|
# |                        |
# |KEY_VOLUMEUP      KEY_UP|
# |        KEY_PLAY        |
# |KEY_VOLUMEDOWN  KEY_DOWN|
# |        KEY_SAVE        |
# |KEY_SHUFFLE    KEY_SLEEP|
# |        KEY_PAUSE       |
# \------------------------/
# VOLUME keys are for fan speed
# PLAY starts air conditioner
# PAUSE makes unit fan-only
# SAVE is Energy Saver mode
# SHUFFLE is for Automatic Fan
begin remote
  name  KENMORE_253-79081
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100
  header       9159  4455
  one           639  1615
  zero          639   486
  ptrail        637
  repeat       9103  2199
  pre_data_bits   16
  pre_data       0x10AF
  gap          108066
  toggle_bit_mask 0x0
      begin codes
          KEY_POWER                0x8877
          KEY_TIME                 0x609F
          KEY_VOLUMEUP             0x807F
          KEY_VOLUMEDOWN           0x20DF
          KEY_PLAY                 0x906F
          KEY_UP                   0x708F
          KEY_DOWN                 0xB04F
          KEY_SAVE                 0x40BF
          KEY_SHUFFLE              0xF00F
          KEY_SLEEP                0x00FF
          KEY_PAUSE                0xE01F
      end codes
end remote