68 lines (63 with data), 2.8 kB

# contributed by:
#	Kipp Cannon <kipp|gravity.phys.uwm.edu>
# brand:
#	Echostar
# model no. of remote control:
#	119420
# devices being controlled by this remote:
#	Bell ExpressVu 3100, probably also Echostar 301 and some Dishnet
begin remote
	name	ECHOSTAR-119420
	flags	SPACE_ENC|NO_HEAD_REP|NO_FOOT_REP
	eps	30
	frequency    56000
	header	501	6077
	one	501	1650
	zero	501	2711
	ptrail	501
	foot	501	6077
#	repeat_gap	6077
	gap	6077
	bits	12
	post_data_bits	4
	post_data	0x0
	min_repeat	4
	begin codes
		TV/VIDEO   0x5C0
          KEY_POWER                0x080                     #  Was: POWER
          KEY_PAGEUP               0x3C1                     #  Was: PAGEUP
		PAGEDN     0x1C1
          KEY_MENU                 0x2C0                     #  Was: MENU
          KEY_EPG                  0x500                     #  Was: GUIDE
          KEY_UP                   0x680                     #  Was: UP
          KEY_LEFT                 0x700                     #  Was: LEFT
          KEY_SELECT               0x400                     #  Was: SELECT
          KEY_RIGHT                0x600                     #  Was: RIGHT
          KEY_DOWN                 0x780                     #  Was: DOWN
          KEY_AGAIN                0x6C0                     #  Was: RECALL
          KEY_INFO                 0x000                     #  Was: INFO
		VIEW       0x580
          KEY_CANCEL               0x480                     #  Was: CANCEL
		SYS_INFO   0x900
          KEY_RECORD               0x7C0                     #  Was: RECORD
          KEY_1                    0x100                     #  Was: 1
          KEY_2                    0x140                     #  Was: 2
          KEY_3                    0x180                     #  Was: 3
          KEY_4                    0x200                     #  Was: 4
          KEY_5                    0x240                     #  Was: 5
          KEY_6                    0x280                     #  Was: 6
          KEY_7                    0x300                     #  Was: 7
          KEY_8                    0x340                     #  Was: 8
          KEY_9                    0x380                     #  Was: 9
          KEY_NUMERIC_STAR         0x940                     #  Was: \*
          KEY_0                    0x440                     #  Was: 0
          KEY_NUMERIC_POUND        0x980                     #  Was: HASH
# extra codes that aren't on my remote
          KEY_POWER2               0x040                     #  Was: POWER_ON
          POWER_OFF                0x9C0                     #  Was: POWER_OFF
		SYS_INFO2  0xD80
		DISH_HOME  0xD00
		DISH_HOME2 0xE00
          KEY_SAT                  0xA40                     #  Was: SAT
	end codes
end remote