arm64: dts: renesas: rzt2h-n2h-evk: Mark XSPI1 boot partitions read-only arm64: dts: renesas: rzt2h-n2h-evk: Mark XSPI1 boot partitions read-only - - - --- 2026-08-26 Prabhakar geert New [v2,1/1] pmdomain: renesas: rcar-sysc: Update description of chan_offs, chan_bit, isr_bit [v2,1/1] pmdomain: renesas: rcar-sysc: Update description of chan_offs, chan_bit, isr_bit - - - --- 2026-08-26 Ayman Chaudhry geert New [v2] dt-bindings: i2c: renesas,rcar-i2c: allow 6 DMA channels [v2] dt-bindings: i2c: renesas,rcar-i2c: allow 6 DMA channels - - - --- 2026-08-26 Wolfram Sang geert New [v8,9/9] pwm: rzg2l-gpt: Add support for gpt linking with poeg Add Renesas RZ/G3E GPT support - - - --- 2026-08-25 Biju geert New [v8,8/9] dt-bindings: pwm: rzg2l-gpt: Document renesas,poegs property Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,7/9] pwm: rzg2l-gpt: Add RZ/G3E support Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,6/9] dt-bindings: pwm: Document RZ/G3E GPT support Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,5/9] pwm: rzg2l-gpt: Add calculate_prescale() callback to struct rzg2l_gpt_info Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,4/9] pwm: rzg2l-gpt: Add prescale_mult variable to struct rzg2l_gpt_info Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,3/9] pwm: rzg2l-gpt: Add info variable to struct rzg2l_gpt_chip Add Renesas RZ/G3E GPT support - 1 - --- 2026-08-25 Biju geert New [v8,2/9] pwm: rzg2l-gpt: Convert to waveform callbacks Add Renesas RZ/G3E GPT support - - - --- 2026-08-25 Biju geert New [v8,1/9] pwm: rzg2l-gpt: Fix macro used for period/duty cycle conversion Add Renesas RZ/G3E GPT support - - - --- 2026-08-25 Biju geert New [PATCH/RFT] arm64: dts: renesas: r9a09g047e57-smarc: Update CAN transceivers [PATCH/RFT] arm64: dts: renesas: r9a09g047e57-smarc: Update CAN transceivers - - - --- 2026-08-25 Geert Uytterhoeven geert New [4/4] dmaengine: sh: rcar-dmac: Add support for R-Car Gen5 SoCs dmaengine: sh: rcar-dmac: add R-Car Gen5 X5H support - - - --- 2026-08-25 Wolfram Sang geert New [3/4] dt-bindings: renesas,rcar-dmac: Add support for R-Car X5H SoC dmaengine: sh: rcar-dmac: add R-Car Gen5 X5H support - - - --- 2026-08-25 Wolfram Sang geert New [2/4] dmaengine: sh: rcar-dmac: SMMU doesn't need IPMMU workaround dmaengine: sh: rcar-dmac: add R-Car Gen5 X5H support - 1 - --- 2026-08-25 Wolfram Sang geert New [1/4] dmaengine: sh: rcar-dmac: fix style in struct initialization dmaengine: sh: rcar-dmac: add R-Car Gen5 X5H support - 1 - --- 2026-08-25 Wolfram Sang geert New [v2,4/4] arm64: dts: renesas: r9a09g047e57-smarc: Enable USB2.0 support Add USB2.0 support for RZ/G3E - - - --- 2026-08-25 Tommaso Merciai geert New [v2,3/4] arm64: dts: renesas: r9a09g047: Add USB2.0 support Add USB2.0 support for RZ/G3E - - - --- 2026-08-25 Tommaso Merciai geert New [v2,2/4] arm64: dts: renesas: r9a08g046: Add USB2.0 function device nodes Add USB2.0 support for RZ/G3E - 1 - --- 2026-08-25 Tommaso Merciai geert New [v2,1/4] arm64: dts: renesas: r9a08g046: Add USB2.0 host/phy device nodes Add USB2.0 support for RZ/G3E - - - --- 2026-08-25 Tommaso Merciai geert New [4/4] arm64: dts: renesas: r9a08g046: Add PCIe support Add RZ/G3L PCIe support - - - --- 2026-08-25 Biju geert New [3/4] PCI: rzg3s-host: Add support for RZ/G3L SoC Add RZ/G3L PCIe support - - - --- 2026-08-25 Biju geert New [2/4] clk: renesas: r9a08g046: Add PCIe clocks and reset Add RZ/G3L PCIe support - - - --- 2026-08-25 Biju geert New [1/4] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3L SoC Add RZ/G3L PCIe support - - - --- 2026-08-25 Biju geert New [v2,13/13] drm/panic: Compile KUnit tests as module drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,12/13] drm/panic: Move panic display code into helper library drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann New [v2,11/13] drm/panic: Internalize panic locking in DRM core and helpers drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann New [v2,10/13] drm/panic: Display panic screen via per-plane callback drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann New [v2,09/13] drm/panic: Restrict to primary planes; unconditionally unregister drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,08/13] drm/panic: Split draw_panic_plane() drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,07/13] drm/panic: Retry in dispatch function if panic output fails drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,06/13] drm/panic: Pass global module parameters to drm_panic_dispatch() drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,05/13] drm/panic: Pass colors to draw_panic_dispatch() drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,04/13] drm/panic: Return errno codes if panic output fails drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,03/13] drm/panic: Return -EINVAL if font is not available drm/panic: Split into core and helpers - 1 - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,02/13] drm/panic: Test address from kmap op for NULL drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann kbingham New [v2,01/13] drm/panic: Do not use un-escaped URL as format string drm/panic: Split into core and helpers - - - --- 2026-08-24 Thomas Zimmermann kbingham New [3/3] arm64: dts: renesas: rzt2h-n2h-evk: Enable RTC support Enable RTC support on RZ/T2H and RZ/N2H SoCs - 1 - --- 2026-08-24 Prabhakar geert New [2/3] arm64: dts: renesas: r9a09g087: Add RTC node Enable RTC support on RZ/T2H and RZ/N2H SoCs - 1 - --- 2026-08-24 Prabhakar geert New [1/3] arm64: dts: renesas: r9a09g077: Add RTC node Enable RTC support on RZ/T2H and RZ/N2H SoCs - 1 - --- 2026-08-24 Prabhakar geert New arm64: dts: renesas: Use hyphens in node names arm64: dts: renesas: Use hyphens in node names - 1 - --- 2026-08-22 Krzysztof Kozlowski geert New pmdomain: renesas: rcar-sysc: Update description of chan_offs pmdomain: renesas: rcar-sysc: Update description of chan_offs - - - --- 2026-08-21 Ayman Chaudhry geert New [10/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC sub board support Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [09/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC main board support Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [08/10] arm64: dts: renesas: Add initial SoC DTSI for RZ/G2M v3.0 Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [07/10] clk: renesas: Add support for RZ/G2M v3.0 Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [06/10] dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [05/10] soc: renesas: rcar-rst: Add support for RZ/G2M v3.0 Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [04/10] soc: renesas: Enable SYSC driver for r8a774a3 Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [03/10] pmdomain: renesas: rcar-sys: Add r8a774a3 support Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [02/10] dt-bindings: power: Add r8a774a3 SYSC power domain definitions Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [01/10] soc: renesas: Identify RZ/G2M v3.0 SoC Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC - - - --- 2026-08-21 Ayman Chaudhry geert New [60/70] drm/rzg2l-du: Convert to atomic_create_state drm/crtc: Convert all drivers to atomic_create_state and remove reset - - - --- 2026-08-21 Maxime Ripard kbingham New [59/70] drm/rcar-du: Convert to atomic_create_state drm/crtc: Convert all drivers to atomic_create_state and remove reset - - - --- 2026-08-21 Maxime Ripard kbingham New [20/70] drm/renesas: shmobile: Switch to drm_atomic_helper_crtc_create_state drm/crtc: Convert all drivers to atomic_create_state and remove reset - - - --- 2026-08-21 Maxime Ripard kbingham New [v3,2/2] PCI: dwc: rcar-gen4: Use .post_deinit to handle dw_pcie_ep_init() failures [v3,1/2] PCI: dwc: Add .post_deinit counterpart to endpoint .pre_init callback - 1 1 --- 2026-08-21 Marek Vasut geert New [v3,1/2] PCI: dwc: Add .post_deinit counterpart to endpoint .pre_init callback [v3,1/2] PCI: dwc: Add .post_deinit counterpart to endpoint .pre_init callback - 1 1 --- 2026-08-21 Marek Vasut geert New [v4] net: ethernet: renesas: rswitch: fix device_node refcount leak in rswitch_get_port_node() [v4] net: ethernet: renesas: rswitch: fix device_node refcount leak in rswitch_get_port_node() - - - --- 2026-08-21 Manush Prajwal geert New [45/45] clk: zynqmp: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [44/45] clk: xilinx: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [43/45] clk: xgene: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [42/45] clk: x86: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [41/45] clk: vt8500: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [40/45] clk: versatile: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 1 - --- 2026-08-21 Geert Uytterhoeven geert New [39/45] clk: ux500: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 2 - - --- 2026-08-21 Geert Uytterhoeven geert New [38/45] clk: uniphier: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [37/45] clk: tegra: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [36/45] clk: sunxi: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [35/45] clk: st: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [34/45] clk: stm32: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [33/45] clk: spear: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [32/45] clk: socfpga: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [31/45] clk: silabs: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [30/45] clk: scpi: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [29/45] clk: samsung: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - 1 - --- 2026-08-21 Geert Uytterhoeven geert New [28/45] clk: rockchip: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - 2 - --- 2026-08-21 Geert Uytterhoeven geert New [27/45] clk: renesas: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [26/45] clk: pwm: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [25/45] clk: pistachio: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [24/45] clk: nxp: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - 1 - --- 2026-08-21 Geert Uytterhoeven geert New [23/45] clk: npcm7xx: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [22/45] clk: nomadik: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [21/45] clk: mxs: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [20/45] clk: mvebu: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [19/45] clk: mmp: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [18/45] clk: milbeaut: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [17/45] clk: mediatek: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [16/45] clk: lmk04832: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [15/45] clk: keystone: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [14/45] clk: ingenic: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [13/45] clk: imx: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [12/45] clk: hisilicon: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [11/45] clk: highbank: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [10/45] clk: gemini: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) 1 - - --- 2026-08-21 Geert Uytterhoeven geert New [09/45] clk: fractional-divider: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [08/45] clk: davinci: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - 1 - --- 2026-08-21 Geert Uytterhoeven geert New [07/45] clk: cs2000-cp: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [06/45] clk: clk-axi-clkgen: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - - - --- 2026-08-21 Geert Uytterhoeven geert New [05/45] clk: cdce925: Make sure clk_init_data is fully initialized clk: Make sure clk_init_data is fully initialized (part two) - 1 - --- 2026-08-21 Geert Uytterhoeven geert New